Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
sam97202  
#1 Posted : Tuesday, October 20, 2009 7:48:37 AM(UTC)
sam97202

Rank: Member

Groups: Registered
Joined: 10/20/2009(UTC)
Posts: 1

My dryer is no longer giving off heat. I called and was told it could be one of three issues - heating element, safety thermostat or thermal fuse? Just wondering what is the most likely flaw so that I don't have to purchase all parts.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, October 20, 2009 9:01:02 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for WHIRLPOOL LXE5700W0 | AppliancePartsPros.com

First I would try turning the breaker off/on slowly a couples times. Sometimes you can loose half the line without tripping the breaker and the heater requires the full 240 volts. The motor only requires 120.
If this does not work I would measure it with a meter.
L1 to L2 should be 140 volts
L1 to Neutral and L2 to Neutral should be 120 volts.

If you do not own a meter, I would suggest you purchase a one. You can get a decent digital multimeter for under $20.00. You do not need fancy though it is nice if the leads are a couple feet long.
If it saves ordering one unnecessary part it has paid for itself and you end up owning a useful tool.
Most places will not let you return electrical parts so if you order it, you own it.
A couple things to watch when measuring ohms and continuity
1. Always remove power from the machine otherwise you could blow your meter.
2. Always disconnect at least one side of any device you are checking. This eliminates the possibility of measuring an alternate/parallel circuit path.
3. When checking for closed contacts and continuity use the lowest scale (Usually 200 ohms). Then try higher scales. This scale is 0 to 200 ohms so if the device you are measuring is 300 ohms this scale would show an open circuit which it is not, you are just measuring outside the scale's dynamic range.

There is a good STICKY at the start of this forum about it's use.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Similar Topics
Whirlpool Duet Electric dryer - no heat (Dryer Repair)
by ShawnDS24 2/25/2023 9:08:24 AM(UTC)
Kenmore Gas Dryer - No Heat (Dryer Repair)
by smackover 10/6/2018 5:55:17 PM(UTC)
Whirlpool Duet dryer - no heat (Dryer Repair)
by colino 3/19/2018 10:56:53 AM(UTC)
Kenmore HE3 dryer - no heat (Dryer Repair)
by tdalton 10/2/2017 1:20:19 PM(UTC)
Samsung Dryer - No Heat (Dryer Repair)
by SolomonMan 6/6/2017 10:12:22 AM(UTC)
Kenmore Series 90 Dryer - No Heat (Dryer Repair)
by walt0132 2/22/2015 12:35:59 PM(UTC)
Electric Dryer - No Heat (Dryer Repair)
by kevinlp 10/1/2014 4:28:52 AM(UTC)
Roper Dryer - No heat (Dryer Repair)
by Raider Dana 12/6/2013 4:51:57 AM(UTC)
Whirlpool Duet Dryer - No Heat (Dryer Repair)
by BobBear4 8/24/2013 5:13:45 AM(UTC)
Amana dryer - no heat (Dryer Repair)
by Bthomas67wagon 2/26/2013 3:20:55 PM(UTC)
Electric Whirlpool Dryer - no Heat! (Dryer Repair)
by willow5000 2/5/2013 10:51:32 AM(UTC)
Electric Whirlpool Dryer - no Heat! (Dryer Repair)
by willow5000 2/5/2013 10:51:32 AM(UTC)
Whirlpool Dryer - No heat, Timer Does Not Advance (Dryer Repair)
by katielove22 10/21/2012 12:26:02 PM(UTC)
Estate Electric Dryer - No Heat (Dryer Repair)
by Porkface 5/26/2012 1:49:09 PM(UTC)
Estate Electric Dryer - No Heat (Dryer Repair)
by Porkface 5/26/2012 1:47:21 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.