Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Timer Problem?
Options
Go to last post Go to first unread
Model: HEAVY DUTY 80 SERIES Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
Grump  
#1 Posted : Sunday, January 13, 2013 7:15:30 AM(UTC)
Grump

Rank: Member

Groups: Registered
Joined: 1/13/2013(UTC)
Posts: 4
After the drying cycle, the buzzer goes off normally. When opening the door the buzzer stops, but then resumes when the door is closed. Also if you open the door during the drying cycle, the heat and drum rotation will stop when you open the door, but will restart without pushing the start button when you close the door. Any suggestions on what the problem may be? Thanks...
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Monday, January 14, 2013 12:12:54 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
A model number may help others help you.
Find your model number - AppliancePartsPros.com
THIS FORUM IS DEAD!!!!!!!
Back to top
Grump  
#3 Posted : Monday, January 14, 2013 5:58:51 AM(UTC)
Grump

Rank: Member

Groups: Registered
Joined: 1/13/2013(UTC)
Posts: 4
Originally Posted by: denman Go to Quoted Post
A model number may help others help you.
Find your model number - AppliancePartsPros.com

Sorry. Part number: 96589210 Serial number: ME4521363
Back to top
denman  
#4 Posted : Tuesday, January 15, 2013 12:33:20 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You are still missing part of the model number.
Kenmore numbers are usually 3 digits, a period and then another 8 digits.

The first 3 digits actually tells you who made the unit as Kenmore does not make the machines.
THIS FORUM IS DEAD!!!!!!!
Back to top
Grump  
#5 Posted : Tuesday, January 15, 2013 6:15:27 AM(UTC)
Grump

Rank: Member

Groups: Registered
Joined: 1/13/2013(UTC)
Posts: 4
Originally Posted by: denman Go to Quoted Post
You are still missing part of the model number.
Kenmore numbers are usually 3 digits, a period and then another 8 digits.

The first 3 digits actually tells you who made the unit as Kenmore does not make the machines.


Here is what the sticker inside the door says:

MODEL/STOCK NO.
96589210 65892

No other numbers except the serial no.
Back to top
denman  
#6 Posted : Wednesday, January 16, 2013 3:33:44 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Searching for "80 Series" brings up a 110 prefix so I think the model is a 110.96589210.

Here are your parts
Parts for Kenmore Dryer 11096589210 - AppliancePartsPros.com

Unfortunately I cannot find a wiring diagram for this unit so have to do some guessing.

You may have two problems in the unit.

First unplug the unit and one wire at the push to start switch.
Measure the switch. It should be infinite ohms and then drop to 0 ohms when pushed.

The motor has two centrifugal switches on it. One is for the heating coil. The other is for the start winding disconnect and a start switch by-pass. They are activated when the motor gets close to operating speed.

When you push the start switch the motor runs the centrifugal switches close. Now one of them is for an alternate (parallel) circuit for the start switch. This lets you release the start switch and the motor keeps running.
Since your motor starts running without pushing the start switch odds are that it is shorted.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Timer problem? (Washer Repair)
by johnvbf 1/6/2017 11:44:13 AM(UTC)
Whirlpool EHT 201 OLD!!! Defrost Timer Problem? (Refrigerator & Freezer Repair)
by dsoelter 9/15/2014 3:42:07 PM(UTC)
Possible timer problem? (Dryer Repair)
by vorsk 2/26/2014 6:31:24 AM(UTC)
defrost timer problem? (Refrigerator & Freezer Repair)
by BSTrue 8/12/2013 3:12:50 PM(UTC)
Is this a washer timer problem? (Washer Repair)
by hanketron 4/18/2013 12:00:25 PM(UTC)
Kenmore 600 Series Timer Problem? (Washer Repair)
by fedup352 5/3/2012 10:56:38 AM(UTC)
Maytag washer, timer problem? (Washer Repair)
by Rene' 9/1/2011 5:48:01 AM(UTC)
timer problem? (Washer Repair)
by butlermom9 2/21/2011 12:19:36 PM(UTC)
Kenmore Electric Dryer - Timer Problem?? (Dryer Repair)
by gus1 2/21/2011 8:55:50 AM(UTC)
Maytag timer problem? (Washer Repair)
by Aaron2010 6/24/2010 9:21:34 AM(UTC)
Timer problem???? (Washer Repair)
by sacto 10/12/2009 7:44:26 AM(UTC)
timer problem? (Washer Repair)
by tyount 8/26/2009 3:48:20 PM(UTC)
Timer Problem? (Dryer Repair)
by Amamaman 8/25/2009 4:29:06 PM(UTC)
Maytag timer problem? (Washer Repair)
by dpeter33 6/22/2009 6:21:43 PM(UTC)
Timer problem?? (Washer Repair)
by eamiller 5/26/2008 1:49:20 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET