Rank: Member
Groups: Registered
Joined: 12/11/2008(UTC)
Posts: 6
|
Hello,
The stove top lights do not come on. I replaced the bults and they still do not come on. THe indicator on the front says toggles thru and says off, bright, and night. (mAybe not in that order or wording) Anyway the light does not come on. Any ideas?
Thanks,
Greg
:confused:
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/11/2008(UTC)
Posts: 6
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/22/2009(UTC)
Posts: 3
|
My KitchenAid hood combo has the same problem plus inside light won't come on either.... I'm thinking there may be a fuse that's blown though.... still waiting for some help in the forum before taking on any repairs.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi Greg, Sorry for the delay. The stove top lights operates by the control board. If there is no power to the lights then the control board has to be replaced. - The control board Part number: AP3185305
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: GGman  My KitchenAid hood combo has the same problem plus inside light won't come on either.... I'm thinking there may be a fuse that's blown though.... still waiting for some help in the forum before taking on any repairs. Your question answered here: http://forum.appliancepartspros...icrowave-hood-combo.htmlGene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/16/2011(UTC)
Posts: 1
|
Originally Posted by: Gbear Hello,
The stove top lights do not come on. I replaced the bults and they still do not come on. THe indicator on the front says toggles thru and says off, bright, and night. (mAybe not in that order or wording) Anyway the light does not come on. Any ideas?
Thanks,
Greg
:confused: Did you ever get a response to this? I have the same problem,
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: jmich8 Did you ever get a response to this? I have the same problem, What is the complete model number of the microwave? Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/6/2011(UTC)
Posts: 1
|
I picked up a Kenmore 363.62709200 microwave at a yard sale (for cheap, thankfully) and installed it over my range. The microwave part works great, but the first time I turned the light on, there was an almighty ZAP. I immediately shut the light off, disconnected it from power, and pulled both bulbs, which seemed to be in pretty rough shape. Fearing the worst, I plugged one bulb in and plugged the unit back to wall power. The microwave still works fine, but neither the light nor the range fan will turn on -- the controls happily cycle through "HI / LO / OFF," but there's no response from light or fan. Oh, and I can hear a faint "click" as I cycle through the settings.
Any notion of how I'd go about diagnosing what part's necessary? Is there a separate fuse for the lights/fan?
Thanks!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Adam, Check all light sockets and wires from the control panel to the bottom of the microwave and replace the control board. - The control board Part number: AP3418930
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
