Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
vtrike  
#1 Posted : Sunday, January 4, 2009 8:23:34 PM(UTC)
vtrike

Rank: Member

Groups: Registered
Joined: 12/10/2008(UTC)
Posts: 7

This should be easy for some one who has worked on this machine. It's a maytag commercial dryer and I cant see how to get the cabinet apart. Someone suggested I take off the coin holder and there was a nut . Well there was but it didnt seem to release the top. Any ideas. or where I might find a repair manual. I guessed at the age because it is in the apartment where I live.
Thanks for your help.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Monday, January 5, 2009 6:45:31 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

here's a parts breakdown
Model MDE10CSACW

Nat
vtrike  
#3 Posted : Monday, January 5, 2009 6:50:08 AM(UTC)
vtrike

Rank: Member

Groups: Registered
Joined: 12/10/2008(UTC)
Posts: 7

Thanks for the breakdown. Would still appreciate knowing how to get it apart.
Gene  
#4 Posted : Monday, January 5, 2009 6:49:12 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Try this: remove the screw on each side on the bottom of the front panel. Grab the front panel on the bottom and lift it up till about 45° to release it from the top fasteners. Open the diagrams and you'll see what to do next.

Gene.
vtrike  
#5 Posted : Monday, January 5, 2009 8:10:28 PM(UTC)
vtrike

Rank: Member

Groups: Registered
Joined: 12/10/2008(UTC)
Posts: 7

Thanks Gene, I will give it a try in the morning, If I tried it now I might get kicked out for waking some one up.
thanks again, hope it works.
VErn
vtrike  
#6 Posted : Thursday, January 8, 2009 5:19:22 AM(UTC)
vtrike

Rank: Member

Groups: Registered
Joined: 12/10/2008(UTC)
Posts: 7

I see why Gene is a senior expert. This was the awnser I needed. It worked like a charm. Now I just have to figure out what the noise is.
Thanks again.
vtrike  
#7 Posted : Thursday, January 8, 2009 3:45:58 PM(UTC)
vtrike

Rank: Member

Groups: Registered
Joined: 12/10/2008(UTC)
Posts: 7

My problem was a bad blower wheel, it was out of round and loose on the shaft. Thanks for your help. Vern
Gene  
#8 Posted : Friday, January 9, 2009 4:48:48 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. We are glad you were able to fix it.

Gene.
Users browsing this topic
Guest (3)
Similar Topics
Whirlpool LDA7600W0 Cabinet Removal (Washer Repair)
by rudyrudy 3/27/2013 1:47:53 PM(UTC)
Whirlpool cabinet removal (Washer Repair)
by scott1980 1/14/2011 3:04:57 PM(UTC)
gE wASHER CABINET REMOVAL (Washer Repair)
by CAROLEANNE411 8/16/2010 2:56:06 PM(UTC)
cabinet removal (Washer Repair)
by rnhent12 8/13/2009 8:05:19 AM(UTC)
cabinet removal (Washer Repair)
by beadyiwoman 5/28/2008 5:30:46 PM(UTC)
Cabinet removal (Washer Repair)
by jumbyway 8/23/2007 9:33:21 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.