Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dishwasher doesnt clean
Options
Go to last post Go to first unread
Model: GPDB998JC1 Brand: Frigidaire Age: 5 - 10 years
Previous Topic Next Topic
bgaritty  
#1 Posted : Friday, January 28, 2011 9:34:12 AM(UTC)
bgaritty

Rank: Member

Groups: Registered
Joined: 1/28/2011(UTC)
Posts: 2
I have a Frigidaire model number gpdb998jc1 that is about 10 years old. Dishes dont seem to get clean. Soap dispenser doesnt seem to get cleaned as well.
I cleaned out the drain and no obstructions or dirt.

A few months ago, I replaced the the water inlet valve. Not sure if that did anything.

As it goes through its normal wash cycle, I hear the water filling up the bottom of the tub. As it continues in the cycle, I dont hear the water spraying around the sides of the appliance. I hear the motor running but doesnt sound as quiet as it used to.

Any help would be appreciated!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, January 29, 2011 4:23:06 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for FRIGIDAIRE GPDB998JC1 Frigidaire/dishwasher | AppliancePartsPros.com

Here is the tech sheet
http://manuals.frigidaire.com/prodinfo_pdf/Kinston/154396101.pdf

This should also help
http://frigidaireservicetips.com/pdfs/484_2.pdf

Problem is usually caused by a low fill level or dirty pump filters etc.

Most units fill to just under the heating element.
If it looks low add a couple quarts of hot water after the fill, just be careful to not overfill it.
If it now runs OK then the screen filter on the input side of the water valve is probably dirty.
Remove the valve from the machine and clean the screen filter.
Do not permanently remove the filter as it is there to keep crud out of the valve, which could hold the valve open and cause a flood.


Open up and check the pump/filters.
THIS FORUM IS DEAD!!!!!!!
Back to top
bgaritty  
#3 Posted : Saturday, January 29, 2011 8:28:23 AM(UTC)
bgaritty

Rank: Member

Groups: Registered
Joined: 1/28/2011(UTC)
Posts: 2
thanks very much for the help! Will check it out and see if it works
Back to top
Users browsing this topic
Guest (2)
Similar Topics
dishwasher doesnt clean well (Dishwasher Repair)
by rwalker1911 1/11/2010 10:54:03 AM(UTC)
Dishwasher doesnt clean and arm doesnt turn. (Dishwasher Repair)
by sjskee2 1/6/2009 3:35:42 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET