9 Pages<1234>» Go to Page...

68 degrees and rising Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: PSS27SHNA BS	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

Gene		#11 Posted : Friday, December 23, 2011 3:47:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Make sure the condenser coils on the back are clean. Wait at least 12 hours and recheck the temperatures in both compartments. It's better to measure it, using a refrigerator thermometer. Gene.
User Profile View All Posts by User View Thanks

ws6s		#12 Posted : Friday, December 23, 2011 3:54:38 PM(UTC)
Rank: Member Groups: Registered Joined: 2/10/2010(UTC) Posts: 53		ok gene i will pull it out and remove the cover and vaccum over the coils. i will let you know,thanks todd.
User Profile View All Posts by User View Thanks

ws6s		#13 Posted : Saturday, December 24, 2011 8:28:39 AM(UTC)
Rank: Member Groups: Registered Joined: 2/10/2010(UTC) Posts: 53		ok gene still at around 10 degrees and the freezer fan continues to run.:confused:
User Profile View All Posts by User View Thanks

ws6s		#14 Posted : Saturday, December 24, 2011 4:52:15 PM(UTC)
Rank: Member Groups: Registered Joined: 2/10/2010(UTC) Posts: 53		as of now it is at 15 degrees and rising.
User Profile View All Posts by User View Thanks

Gene		#15 Posted : Saturday, December 24, 2011 5:15:26 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the rear panel in the freezer and check how the evaporator coils are covered with snow. If the coils are clean while the compressor is running, then there is a problem with the sealed system. It can be low on Freon. You have to call a pro to check the pressure in the sealed system. Gene.
User Profile View All Posts by User View Thanks

ws6s		#16 Posted : Monday, December 26, 2011 12:43:56 PM(UTC)
Rank: Member Groups: Registered Joined: 2/10/2010(UTC) Posts: 53		ok gene i finally pulled the panel off and it is all covered with snow.freezer temperature reads at 15 degrees at thermostat and around 30 from guage.heres a picture of the evaporator. thanks todd
User Profile View All Posts by User View Thanks

ws6s		#17 Posted : Monday, December 26, 2011 12:50:41 PM(UTC)
Rank: Member Groups: Registered Joined: 2/10/2010(UTC) Posts: 53
User Profile View All Posts by User View Thanks

Gene		#18 Posted : Monday, December 26, 2011 1:47:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check for continuity the defrost heater and overtemperature thermostat (#230 & #240 on the diagram) while they are cold. Post the results. Gene.
User Profile View All Posts by User View Thanks

ws6s		#19 Posted : Monday, December 26, 2011 3:34:40 PM(UTC)
Rank: Member Groups: Registered Joined: 2/10/2010(UTC) Posts: 53		Originally Posted by: Gene Check for continuity the defrost heater and overtemperature thermostat (#230 & #240 on the diagram) while they are cold. Post the results. Gene. gene the link to the diagram is no good can you please send it to me again.also the freezer is now at 21 degrees and holding.why didnt i have a problem b4 i replaced the motherboard with the freezer ? todd
User Profile View All Posts by User View Thanks

Gene		#20 Posted : Monday, December 26, 2011 3:48:09 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: ws6s gene the link to the diagram is no good can you please send it to me again.also the freezer is now at 21 degrees and holding.why didnt i have a problem b4 i replaced the motherboard with the freezer ? todd It's fixed. Sorry, my bad. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

9 Pages<1234>» Go to Page...