Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

4 Pages123>»
Options
Go to last post Go to first unread
Todd Overton  
#1 Posted : Monday, March 15, 2010 1:03:35 PM(UTC)
Todd Overton

Rank: Member

Groups: Registered
Joined: 3/15/2010(UTC)
Posts: 1

how do I replace the water line in the freezer door because it has been broken inside the door and it leaks when I use the water dispenser?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, March 15, 2010 3:02:20 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Todd,

The instructions are attached to the reply.

- The water tube Part number: AP3108776
Part number: AP3108776



Here are the breakdown diagrams and Replacement parts for WHIRLPOOL ED22TEXHW00 | AppliancePartsPros.com

Gene.
File Attachment(s):
Removing the water dispenser fill tube.doc (537kb) downloaded 516 time(s).
RMC  
#3 Posted : Saturday, April 17, 2010 7:51:04 AM(UTC)
RMC

Rank: Member

Groups: Registered
Joined: 4/17/2010(UTC)
Posts: 3

I apparently have the same or similar problem. I can get water to dispense at the union at the base of the fridge, but there must be a plug or break in the line between the union and the door dispenser.

Gene, how do you install the new fill line? How do you route it back up through the door to the dispenser?

Thanks
Gene  
#4 Posted : Saturday, April 17, 2010 4:20:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: RMC Go to Quoted Post
I apparently have the same or similar problem. I can get water to dispense at the union at the base of the fridge, but there must be a plug or break in the line between the union and the door dispenser.

Gene, how do you install the new fill line? How do you route it back up through the door to the dispenser?

Thanks


What is the complete model number of the refrigerator?

Gene.
RMC  
#5 Posted : Wednesday, April 21, 2010 8:04:58 PM(UTC)
RMC

Rank: Member

Groups: Registered
Joined: 4/17/2010(UTC)
Posts: 3

It's a ED25CQXFB02.

And I did fix my problem (left the door open ~ 1 hour; apparently the line was frozen).

But just in case (preparing for the possibility?) I would like to know how to change the line.

Thanks
Gene  
#6 Posted : Wednesday, April 21, 2010 10:26:32 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The instructions are attached to the reply.

- The water tube Part number: AP3108776
Part number: AP3108776



Here are the breakdown diagrams and Replacement parts for WHIRLPOOL ED25CQXFB02 | AppliancePartsPros.com

Gene.
File Attachment(s):
Removing the water dispenser fill tube.doc (537kb) downloaded 240 time(s).
RMC  
#7 Posted : Thursday, April 22, 2010 5:17:36 AM(UTC)
RMC

Rank: Member

Groups: Registered
Joined: 4/17/2010(UTC)
Posts: 3

Thanks Gene.

Any tips on how to feed the new line back through the door?
cybolt  
#8 Posted : Thursday, July 29, 2010 3:09:53 PM(UTC)
cybolt

Rank: Member

Groups: Registered
Joined: 7/29/2010(UTC)
Posts: 9

Originally Posted by: Gene Go to Quoted Post
The instructions are attached to the reply.

- The water tube Part number: AP3108776


Gene, I have a similar problem with my GE Profile TFXW27FLR. The water dispenser line was severed apparently right at the point that it enters the hinge on the bottom of the Freezer Door. (At least, I think it goes in/out at the hinge - there is no line there left to verify.)

The mechanism works great but when I press for water, it shoots out of the line at the bottom of the fridge!

How do I replace the line running from the water spout, through the door, out the hinge (I think) and into the union (which is clearly visible at this time?

Thanks for your prompt reply.

Cybolt
Gene  
#9 Posted : Thursday, July 29, 2010 5:02:48 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: cybolt Go to Quoted Post
Gene, I have a similar problem with my GE Profile TFXW27FLR. The water dispenser line was severed apparently right at the point that it enters the hinge on the bottom of the Freezer Door. (At least, I think it goes in/out at the hinge - there is no line there left to verify.)

The mechanism works great but when I press for water, it shoots out of the line at the bottom of the fridge!

How do I replace the line running from the water spout, through the door, out the hinge (I think) and into the union (which is clearly visible at this time?

Thanks for your prompt reply.

Cybolt


Try to remove the recess panel (#22 on the diagram).

- The water line assembly Part number: AP2643670
cybolt  
#10 Posted : Thursday, July 29, 2010 8:29:19 PM(UTC)
cybolt

Rank: Member

Groups: Registered
Joined: 7/29/2010(UTC)
Posts: 9

Originally Posted by: Gene Go to Quoted Post
Try to remove the recess panel (#22 on the diagram).

- The water line assembly Part number: AP2643670

Yes, I have removed the recess panel from the inside of the freezer door. None of the parts in the picture above are immediately visible. The only thing I notice is a silver box held by two hex screws that appears to be the backside of the dispenser mechanism.
Users browsing this topic
Guest (6)
4 Pages123>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.