Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

207 Pages«<7980818283>»
Options
Go to last post Go to first unread
Gene  
#801 Posted : Friday, April 16, 2010 8:22:57 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome and thank you for your good words. Keep us posted.

Gene.
ratterme  
#802 Posted : Saturday, April 17, 2010 6:03:29 AM(UTC)
ratterme

Rank: Member

Groups: Registered
Joined: 4/17/2010(UTC)
Posts: 4

Hi,

Dont mean to hijack a thread but I am new and I didnt want to start a new topic about the same thing.

I have a GE GDS18LBR.. The evap coils keep freezing and stopping the evap fan. I verified with a meter that the heater and thermistat are ok.. so I replaced the defrost timer. However it is still icing over and stopping the fan.

When I manually turn the timer it goes into defrost and the heater heats up and melts the ice.

One thing is The evap motor seems to be making a little more noise than I remember.

Any ideas?

Thank you

Mike
Gene  
#803 Posted : Saturday, April 17, 2010 3:45:06 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Mike,

Make sure the drain in the freezer (under the evaporator) is completely open.

Here are the breakdown diagrams and Replacement parts for General Electric GDS18LBRABB Refrigerator | AppliancePartsPros.com

Gene.
jeffrey_benjamin  
#804 Posted : Saturday, April 17, 2010 4:53:13 PM(UTC)
jeffrey_benjamin

Rank: Member

Groups: Registered
Joined: 11/4/2009(UTC)
Posts: 58

Originally Posted by: Gene Go to Quoted Post
Mike,

Make sure the drain in the freezer (under the evaporator) is completely open.

Here are the breakdown diagrams and Replacement parts for General Electric GDS18LBRABB Refrigerator | AppliancePartsPros.com

Gene.

Hi also ck condition of part # 8 on diagram to make sure it is not water soaked.
ratterme  
#805 Posted : Sunday, April 18, 2010 5:24:45 AM(UTC)
ratterme

Rank: Member

Groups: Registered
Joined: 4/17/2010(UTC)
Posts: 4

Hi,

I first want to say thanks everyone for their quick reply.

I have checked the evaporator drain( poured water down and it came out the bottom of the back of the fridge). I also checked Part# 8 and it seems pretty dry. as of right now I have part #2 completely off and I am running the fridge with part# 15 closed up pretty good. Like I said it seems the defrost cycle is doing its job however the evap coils seem to ice over pretty fast(~1hour maybe less) and stop the evap fan.

Not sure but I would say this either is poor circulation from the evap fan, or lack of refrigerant but I dont think thats possible. ?

Thanks again!

Mike
Gene  
#806 Posted : Monday, April 19, 2010 6:40:13 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Quote:
...the evap coils seem to ice over pretty fast(~1hour maybe less)...


I hour since the end of the defrost cycle?

Gene.
ratterme  
#807 Posted : Monday, April 19, 2010 6:52:10 PM(UTC)
ratterme

Rank: Member

Groups: Registered
Joined: 4/17/2010(UTC)
Posts: 4

Originally Posted by: Gene Go to Quoted Post
I hour since the end of the defrost cycle?

Gene.


Yes, and as soon as I plug it in.

Mike
jeffrey_benjamin  
#808 Posted : Monday, April 19, 2010 7:01:02 PM(UTC)
jeffrey_benjamin

Rank: Member

Groups: Registered
Joined: 11/4/2009(UTC)
Posts: 58

Originally Posted by: Gene Go to Quoted Post
I hour since the end of the defrost cycle?

Gene.

Check your evaporator fan motor rotation & can you identify where the fan is touching the ice? Is it in the housing or the evaporato coil ice . After 1 hour it should not build up so much ice to block the fan. Put the cover back on & ck air flow in both freezer & ref section. Also is the evaporator fully frosted going down to the SUCTION LINE . :rolleyes:
labjr  
#809 Posted : Thursday, April 22, 2010 6:11:37 AM(UTC)
labjr

Rank: Member

Groups: Registered
Joined: 4/22/2010(UTC)
Posts: 3

Hello everyone. This is my first post.

I have a model GSH22JFTACC which is freezing up. The main board was changed in January but is still freezing up. After reading a bit. I looked for the thermistors. I think they are original since they don't appear to be spliced. I'll try to test them next.

Does anyone know if there's away to get the computer to turn on the defrost cycle besides jumping out the line and defrost terminals?

Thanks
Gene  
#810 Posted : Thursday, April 22, 2010 12:35:14 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I do not think this model has ability to force defrost cycle.

Gene.
Users browsing this topic
Guest (2)
Similar Topics
Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by mrhoagie 11/3/2012 1:46:58 PM(UTC)
Another Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by rzeune 10/7/2010 9:19:39 AM(UTC)
Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by allemich 4/19/2009 8:02:07 PM(UTC)
207 Pages«<7980818283>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.