Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
ron-e-g  
#1 Posted : Wednesday, March 10, 2010 5:51:01 PM(UTC)
ron-e-g

Rank: Member

Groups: Registered
Joined: 3/10/2010(UTC)
Posts: 3

Can someone help with a parts sheet or give me some advise as to how I would diagonose and repair this loose tub? I suspect the dampers but I can't figure out how to even get the top off to look!:)

Thanks in advance. Ron
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Friday, March 12, 2010 3:08:50 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

This site will show you how to take off the cabinet to inspect it. Check the springs and the support plate.

Kenmore top loader blues (SublimeMasterJW's Appliance Advice)
ron-e-g  
#3 Posted : Saturday, March 13, 2010 8:17:09 AM(UTC)
ron-e-g

Rank: Member

Groups: Registered
Joined: 3/10/2010(UTC)
Posts: 3

Originally Posted by: sidfink43 Go to Quoted Post
This site will show you how to take off the cabinet to inspect it. Check the springs and the support plate.

Kenmore top loader blues (SublimeMasterJW's Appliance Advice)


Thanks sidfink. I have already removed the cabinet. All the springs are attached. I don't know what to look for other than that. As for the support plate.. same thing applies I don't know what I'm looking for. The whole unit ( motor, pump and plate seems to move very freely) I don't know how it all should feel normaly.:( Also I removed the drive block and inspected it.... it seems OK but yet again what's OK?:D
sidfink43  
#4 Posted : Saturday, March 13, 2010 3:04:41 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Look at the pads on the plate, but even if they are worn and need replacing I would also replace the springs. It is an easy and inexpensive process. Many times they are bad, but it is not noticeable to the ********** eye.
ron-e-g  
#5 Posted : Wednesday, March 17, 2010 12:05:33 PM(UTC)
ron-e-g

Rank: Member

Groups: Registered
Joined: 3/10/2010(UTC)
Posts: 3

Thanks sidfink.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.