Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

21 Pages«<1112131415>»
Options
Go to last post Go to first unread
HXLVRME  
#121 Posted : Tuesday, November 3, 2009 8:23:50 PM(UTC)
HXLVRME

Rank: Member

Groups: Registered
Joined: 11/3/2009(UTC)
Posts: 3

i tried to reset the clock for the time change and recd the error message 5ab. maytag touchpad
Gene  
#122 Posted : Tuesday, November 3, 2009 10:50:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Push and hold the Clock button for about 5 seconds or until it beeps.

Gene.
HXLVRME  
#123 Posted : Wednesday, November 4, 2009 2:30:55 PM(UTC)
HXLVRME

Rank: Member

Groups: Registered
Joined: 11/3/2009(UTC)
Posts: 3

Thanks So Much For The Help
Gene  
#124 Posted : Wednesday, November 4, 2009 3:44:09 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome.

Gene.
bboustany  
#125 Posted : Saturday, November 7, 2009 12:35:36 PM(UTC)
bboustany

Rank: Member

Groups: Registered
Joined: 11/7/2009(UTC)
Posts: 9

The frigidaire error codes go up to F9. Do you have any idea what F20 means?
Gene  
#126 Posted : Saturday, November 7, 2009 1:35:36 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: bboustany Go to Quoted Post
The frigidaire error codes go up to F9. Do you have any idea what F20 means?


Answered here: http://forum.appliancepartspros...ctric-range-cooktop.html

Gene.
SimonPatrice  
#127 Posted : Monday, November 30, 2009 12:25:45 PM(UTC)
SimonPatrice

Rank: Member

Groups: Registered
Joined: 11/30/2009(UTC)
Posts: 1

Hi,

I have a JCBP40w0j2ww GE self-cleaning convection range. For a couple of months, I had been getting the F2 error quite frequently, especially when I would pre-heat the oven at 550F for about an hour. Then, I started to get the F2 pretty much anytime, even at low temps. In the last months, no more F2, the oven just shuts off anytime it feels like it.

Could just changing the temp sensor solve the problem or do I have to spend a lot more to change the whole control panel?

Also, how easy is it to do all of this myself? I've never done any electrical repair myself.

Thank you very much!
Patrice
Gene  
#128 Posted : Monday, November 30, 2009 1:47:12 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Patrice,

The error code “F2” will be displayed along with a beeping sound if the ERC (Electronic Range Control) or “clock” senses a runaway heat condition during the “cook” or the “clean” modes. It could be caused by the oven temperature sensor, by the ERC or by the wire harness between the oven temperature sensor and the ERC.

The access to the oven temperature sensor plug and the wires is from the back only. You have to pull the range out of the wall. Disconnect the power and remove the rear cover. Check the resistance across the oven temperature sensor at the quick disconnect plug. It is supposed to be about 1100 Ohms at room temperature. If the resistance is incorrect, the oven temperature sensor is bad and needs to be replaced. If not, check all the wires from the oven temperature sensor to the ERC.

It is a good idea to eliminate the sensor quick disconnect plug and reconnect the sensor, using a high temperature porcelain wire nuts. Power up the range and check how the oven works.

If it's not the sensor and/or wires, replace the ERC.

- The oven sensor Part number: AP3192829
Part number: AP3192829


- The ERC Part number: AP3772904
Part number: AP3772904


- The porcelain wire nuts Part number: AP3440631
Part number: AP3440631



If you know how to handle a simple tools, this job is not too difficult to do it yourself and you can save a big $$$.

Here are the breakdown diagrams and Replacement parts for General Electric JCBP40WJ2WW Electric range | AppliancePartsPros.com

Gene.
myamanastove  
#129 Posted : Monday, November 30, 2009 4:01:25 PM(UTC)
myamanastove

Rank: Member

Groups: Registered
Joined: 11/30/2009(UTC)
Posts: 7

Originally Posted by: Sailn Go to Quoted Post
Thank you for the oven codes. I do not see F7-E0 under Kitchenaid.....do you have additional information??

Thank you in advance!

;)


Hi, will you please send me the error codes for Amana Model AC5720AS

Thanks!
myamanastove  
#130 Posted : Monday, November 30, 2009 4:02:44 PM(UTC)
myamanastove

Rank: Member

Groups: Registered
Joined: 11/30/2009(UTC)
Posts: 7

Hi will somebody please send me the error codes for Amana Model No. AC5720AS?

Thanks!
Users browsing this topic
Guest (2)
Similar Topics
Thermador Oven error codes (Oven Repair (including Ranges and Cooktops))
by jblake9000 9/25/2015 9:01:34 AM(UTC)
Oven Error Codes & Won't Heat Fully (Oven Repair (including Ranges and Cooktops))
by davem68 4/18/2013 7:46:23 AM(UTC)
Whirlpool oven error codes (Oven Repair (including Ranges and Cooktops))
by ajsml 9/10/2012 10:21:53 AM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by fred jacoby 4/4/2012 9:44:17 AM(UTC)
Oven error codes (Oven Repair (including Ranges and Cooktops))
by sigman 3/23/2012 9:08:14 AM(UTC)
kENMORE OVEN ERROR CODES E3 FI (Oven Repair (including Ranges and Cooktops))
by chrisb361 12/11/2011 3:37:20 PM(UTC)
Whirlpool Electic oven error codes (Oven Repair (including Ranges and Cooktops))
by fcarrelli 9/7/2010 5:56:53 AM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 4:58:30 PM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 4:56:50 PM(UTC)
GE Oven error codes (Oven Repair (including Ranges and Cooktops))
by BobChurch 9/1/2009 4:51:40 PM(UTC)
GE oven error codes (Oven Repair (including Ranges and Cooktops))
by bdeinhardt@aol.com 6/25/2009 5:47:37 AM(UTC)
Whirlpool Double Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by alaucks 1/14/2009 9:31:27 AM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by cndybkr 9/29/2008 12:13:03 PM(UTC)
Additional Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by indydoug 11/15/2007 6:43:00 PM(UTC)
21 Pages«<1112131415>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.