Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
norm123  
#1 Posted : Wednesday, May 5, 2010 12:03:44 PM(UTC)
norm123

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 6

:) I want to replace my white control panel and door panel with a black control panel and stainless steel door panel. :) Is it an easy DIY project and where can I get instructions?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, May 5, 2010 6:12:50 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: norm123 Go to Quoted Post
:) I want to replace my white control panel and door panel with a black control panel and stainless steel door panel. :) Is it an easy DIY project and where can I get instructions?


The black control panel Part number: AP4261639
Part number: AP4261639



The stainless steel outer door panel Part number: AP4323382
Part number: AP4323382


If you know how to handle a simple tools these parts are not too difficult to replace yourself.

Open the door and remove the six screws holding the control panel. Close the door and pull the top of the console away from the door. Disconnect the ribbon cable from the control board. Lift the console up to disengage the bottom tabs from the door frame and set the console aside. Remove the screws securing the control board to the console. Install the control board to the new console and assemble it in the reversed order.

Open the door and remove the four screws on each side of the door holding the outer door panel, securing the outer door panel with one hand from the front of it.

Gene.
norm123  
#3 Posted : Thursday, May 6, 2010 5:05:34 AM(UTC)
norm123

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 6

:)
Originally Posted by: Gene Go to Quoted Post
The black control panel Part number: AP4261639
Part number: AP4261639



The stainless steel outer door panel Part number: AP4323382
Part number: AP4323382


If you know how to handle a simple tools these parts are not too difficult to replace yourself.

Open the door and remove the six screws holding the control panel. Close the door and pull the top of the console away from the door. Disconnect the ribbon cable from the control board. Lift the console up to disengage the bottom tabs from the door frame and set the console aside. Remove the screws securing the control board to the console. Install the control board to the new console and assemble it in the reversed order.

Open the door and remove the four screws on each side of the door holding the outer door panel, securing the outer door panel with one hand from the front of it.

Gene.

I'll try to take it apart and put it back together. If it works,I'll order the parts and do it for real. Thanks Gene.
norm123  
#4 Posted : Thursday, May 6, 2010 5:11:21 AM(UTC)
norm123

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 6

Thanks Gene. I'll try and if successful, I'll order the parts and do it for real.
Gene  
#5 Posted : Thursday, May 6, 2010 10:52:30 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Keep us posted.

Gene.
norm123  
#6 Posted : Tuesday, May 25, 2010 9:24:07 AM(UTC)
norm123

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 6

Originally Posted by: Gene Go to Quoted Post
You are welcome. Keep us posted.

Gene.

Finally decided to try to remove panel but the screwheads are star shaped. What kind of screwdriver do you use for that?
Gene  
#7 Posted : Tuesday, May 25, 2010 1:44:47 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: norm123 Go to Quoted Post
Finally decided to try to remove panel but the screwheads are star shaped. What kind of screwdriver do you use for that?


Sounds like a Torx head screws. You need a special screwdriver for such screws.

Gene.
norm123  
#8 Posted : Wednesday, May 26, 2010 5:37:46 AM(UTC)
norm123

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 6

Thanks. It's shaped like a star and went to Lowes. Didn't have the right size but now that I know its called Torx, I should have better luck.
norm123  
#9 Posted : Tuesday, July 13, 2010 10:02:52 AM(UTC)
norm123

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 6

Originally Posted by: norm123 Go to Quoted Post
Thanks. It's shaped like a star and went to Lowes. Didn't have the right size but now that I know its called Torx, I should have better luck.


Gene,
Finally replaced the parts. Your advice was invaluable. Thanks again.
Gene  
#10 Posted : Tuesday, July 13, 2010 7:28:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. I'm glad you were able to fix it.

Gene.
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.