Compactor won't stop after unpacking - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Compactor won't stop after unpacking Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GCG1580P0SS	Brand: GE	Age: Less than 1 year
Previous Topic Next Topic

red1953		#1 Posted : Thursday, January 21, 2010 1:06:16 PM(UTC)
Rank: Member Groups: Registered Joined: 1/21/2010(UTC) Posts: 2		When I activate the compactor you can hear it go down and start back up. Rather than stopping when it should, it makes a very loud thump thump thump noise until I start to open the drawer. At that point the noise stops. Also, when I set the switch for SOLID PACK, it doesn't. It goes down and immediately comes back up and finished by making the THUMP THUMP THUMP rapid sound until i try to open it.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

jet27		#2 Posted : Tuesday, March 2, 2010 12:24:27 PM(UTC)
Rank: Member Groups: Registered Joined: 3/1/2010(UTC) Posts: 1		Hi...I have the same problem. Did you get your fixed and if so, do you know what part was defective? I have exactly the same model and have already replaced the limiter switch - but that didn't fix it. Thanks for any help you can give me.


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Tuesday, March 2, 2010 2:42:45 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: red1953 When I activate the compactor you can hear it go down and start back up. Rather than stopping when it should, it makes a very loud thump thump thump noise until I start to open the drawer. At that point the noise stops. Also, when I set the switch for SOLID PACK, it doesn't. It goes down and immediately comes back up and finished by making the THUMP THUMP THUMP rapid sound until i try to open it. Most likely the problem is a bad start-run rotary switch. - The start switch Part number: AP4429577 Gene.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, March 2, 2010 2:43:59 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: jet27 Hi...I have the same problem. Did you get your fixed and if so, do you know what part was defective? I have exactly the same model and have already replaced the limiter switch - but that didn't fix it. Thanks for any help you can give me. If the model number and the problem are exactly the same, then the solution is probable the same as well. Gene.


User Profile View All Posts by User View Thanks

red1953		#5 Posted : Tuesday, March 2, 2010 3:52:18 PM(UTC)
Rank: Member Groups: Registered Joined: 1/21/2010(UTC) Posts: 2		The switch at the lower right hand side used to activate the compacter was burned and sticking in the IN position causing the compactor to continue to run. Swapped out the switch and works fine.


User Profile View All Posts by User View Thanks

ptd123456		#6 Posted : Tuesday, June 28, 2011 5:54:18 PM(UTC)
Rank: Member Groups: Registered Joined: 6/28/2011(UTC) Posts: 1		i have the same exact problem. was it the bottom switch that needed replacement?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close