Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
red1953  
#1 Posted : Thursday, January 21, 2010 1:06:16 PM(UTC)
red1953

Rank: Member

Groups: Registered
Joined: 1/21/2010(UTC)
Posts: 2

When I activate the compactor you can hear it go down and start back up. Rather than stopping when it should, it makes a very loud thump thump thump noise until I start to open the drawer. At that point the noise stops.

Also, when I set the switch for SOLID PACK, it doesn't. It goes down and immediately comes back up and finished by making the THUMP THUMP THUMP rapid sound until i try to open it.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jet27  
#2 Posted : Tuesday, March 2, 2010 12:24:27 PM(UTC)
jet27

Rank: Member

Groups: Registered
Joined: 3/1/2010(UTC)
Posts: 1

Hi...I have the same problem. Did you get your fixed and if so, do you know what part was defective? I have exactly the same model and have already replaced the limiter switch - but that didn't fix it.
Thanks for any help you can give me.
Gene  
#3 Posted : Tuesday, March 2, 2010 2:42:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: red1953 Go to Quoted Post
When I activate the compactor you can hear it go down and start back up. Rather than stopping when it should, it makes a very loud thump thump thump noise until I start to open the drawer. At that point the noise stops.

Also, when I set the switch for SOLID PACK, it doesn't. It goes down and immediately comes back up and finished by making the THUMP THUMP THUMP rapid sound until i try to open it.


Most likely the problem is a bad start-run rotary switch.

- The start switch Part number: AP4429577
Part number: AP4429577


Gene.
Gene  
#4 Posted : Tuesday, March 2, 2010 2:43:59 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: jet27 Go to Quoted Post
Hi...I have the same problem. Did you get your fixed and if so, do you know what part was defective? I have exactly the same model and have already replaced the limiter switch - but that didn't fix it.
Thanks for any help you can give me.


If the model number and the problem are exactly the same, then the solution is probable the same as well.

Gene.
red1953  
#5 Posted : Tuesday, March 2, 2010 3:52:18 PM(UTC)
red1953

Rank: Member

Groups: Registered
Joined: 1/21/2010(UTC)
Posts: 2

The switch at the lower right hand side used to activate the compacter was burned and sticking in the IN position causing the compactor to continue to run. Swapped out the switch and works fine.
ptd123456  
#6 Posted : Tuesday, June 28, 2011 5:54:18 PM(UTC)
ptd123456

Rank: Member

Groups: Registered
Joined: 6/28/2011(UTC)
Posts: 1

i have the same exact problem. was it the bottom switch that needed replacement?
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.