Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dryer stoppped in middle of cyc, will not restart. HELP
Options
Go to last post Go to first unread
Model: ? Brand: Roper Age: 5 - 10 years
Previous Topic Next Topic
DustinAZ  
#1 Posted : Tuesday, March 4, 2008 10:14:43 AM(UTC)
DustinAZ

Rank: Member

Groups: Registered
Joined: 3/4/2008(UTC)
Posts: 3
have power to unit, sticker on inside of unit say something about replacing thermal cutoff and Hi limit thermostat? will this help? :confused:
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, March 5, 2008 9:33:35 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Dustin,

In order to provide most accurate advise I need the complete model number of the dryer and more specific description of the problem.

Gene.
Back to top
DustinAZ  
#3 Posted : Wednesday, March 5, 2008 2:06:14 PM(UTC)
DustinAZ

Rank: Member

Groups: Registered
Joined: 3/4/2008(UTC)
Posts: 3
I'll get that info to you asap. Thanks for your help, I just moved to Northern Arizona, two hours away from a big city. I can fix just about and thing, just need some advise. Thanks again, keep an eye out for me. I should have that info tonight posted. Dustin
Back to top
DustinAZ  
#4 Posted : Wednesday, March 5, 2008 5:08:48 PM(UTC)
DustinAZ

Rank: Member

Groups: Registered
Joined: 3/4/2008(UTC)
Posts: 3
Gene, thanks again, here's some info. Roper Dryer, Model# rex4625ew2 type: 122-00 I was drying some clothes, walked out to the shop to se if they were done and noticed that the clothes were still a little damp and the timer still show about mid cycle. I tried to re start and nothing, i tried the other two cycles and nothing. I tested outlet and I have power. Do you need any other info? I can fax you the wire diagram, I found it in side the top cover. Let me know what you think. Thank you so much!!!!!!:o
Back to top
Gene  
#5 Posted : Wednesday, March 5, 2008 6:11:57 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Dustin,

The first thing I would do is check the following parts for continuity:

1. The heating element (#17 on the bulkhead parts break down diagram).

2. The thermal cut-off (#6 on the bulkhead parts break down diagram).

3. The hi limit thermostat (#15 on the bulkhead parts break down diagram).

4. The cycling thermostat (#24 on the bulkhead parts break down diagram).

The following article on our forum will explain in detail how to run a continuity test using either an analog meter or a digital meter – How to check continuity with Ohmmeter.

Any of these parts with an open circuit has to be replaced.

- The part number for the heating element is AP3094254

- The part number for the thermal cut-off (including the hi limit thermostat) is AP3094244

- The part number for the hi limit thermostat is AP3131941

- The part number for the cycling thermostat is AP3115922

Here are the break down diagrams for the Roper dryer Model REX4625EW2

Good luck.
Gene.
Back to top
Users browsing this topic
Guest (6)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET