set temp to bake 350\\ top element heats (185) no heat on bottom element
110volts to each leg of bottom element

Full continuity on bottom when pwr off- no resistance

Set upper element leads to bottom element-pwr on - red hot 220volts across terminals

Pwr from L1 -> upper element and lower element (OK)

Pwr from L2 -> control switch of bake element and AUX (OK)

control switch E7 sends current to Upper element E6 sends current to lower element

With oven turned on to bake, I get a reading across Upper element terminals of 220v and the lower element nothing across the two terminals, but 110v from each to ground.




Yellow wire from switch E6 to Lower element
Purple wire from switch E7 to Upper element


Can't figure why the bottom element only gets 110V on each terminal when should be 220V