flame sensor - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

flame sensor Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MLG32PDBWW/Q	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

belfair laundry		#1 Posted : Saturday, June 2, 2018 3:32:25 PM(UTC)
Rank: Member Groups: Registered Joined: 6/2/2018(UTC) Posts: 2		i have to commercial gas dryers that are not getting hot i have changed out the thermostats, thermister, igniter, sail switch and i have checked the solenoids i'm on to removing the flame sensor but the screw is stuck and i cant get it out no matter what i do i'm not sure what it could be if its not that any help would be amazing. Its a large commercial Maytag dryer. or if you know hot to get a screw out of metal in a very tight spot.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Users browsing this topic
Guest (2)

Similar Topics

gas hot water heater flame sensor (General Talk)
by normpete 1/21/2022 9:10:29 AM(UTC)

Gas dryer flame sensor not tripping (Dryer Repair)
by Guest 6/1/2021 7:32:22 PM(UTC)

Igniter, flame sensor, soleniods, thermal sensor all OK - but no heat (Dryer Repair)
by silentrunningpc 9/1/2016 4:34:36 PM(UTC)

No power to flame sensor, gas valves, or ignitor (Dryer Repair)
by ms0674 8/9/2014 2:37:45 PM(UTC)

Dryer Flame Sensor (Dryer Repair)
by TomHam 9/3/2013 1:00:20 PM(UTC)

Replaced gas coil, ignitor, flame sensor.. (Dryer Repair)
by dspcr 8/16/2013 4:12:54 PM(UTC)

flame stays lit for a few (20) seconds then goes out. could it be the flame sensor? h (Dryer Repair)
by grubxx96 11/11/2011 1:01:45 PM(UTC)

Kenmore replaced coils,ignitor,and flame sensor still no heat. (Dryer Repair)
by cfreeman 12/30/2010 10:31:48 AM(UTC)

Thermal fuse and Flame sensor wiring (Dryer Repair)
by cwizzards 5/7/2010 10:22:30 AM(UTC)

Dryer Flame Sensor (Dryer Repair)
by Dangilligan 9/9/2009 5:34:55 PM(UTC)

relpaced coils and flame sensor and no heat (Dryer Repair)
by mjl 7/3/2009 2:20:19 PM(UTC)

Wiring Flame Sensor (Dryer Repair)
by TomGJohnson 6/9/2009 2:29:13 PM(UTC)

New flame sensor failure? (Dryer Repair)
by spiderberg 4/1/2009 6:54:40 AM(UTC)

Flame sensor (Dryer Repair)
by redrwut 2/21/2009 9:18:14 AM(UTC)

Which wire to which terminal on the flame sensor? (Dryer Repair)
by supertramp 1/13/2009 2:22:16 PM(UTC)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close