Frigidaire Front Washer does not spin - intermittent issue - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Frigidaire Front Washer does not spin - intermittent issue Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FWT647GHS0	Brand: Frigidaire	Age: More than 10 years
Previous Topic Next Topic

jamesm113		#1 Posted : Tuesday, June 23, 2015 9:13:55 PM(UTC)
Rank: Member Groups: Registered Joined: 6/23/2015(UTC) Posts: 3		Hello, I have a 2000 model Frigidaire front washer that has been intermittently not performing the spin cycle. Instead it will tumble the load until the buzzer sounds. Sometimes there is still water in the drum. We're able to get around the issue by re-setting the timer to the final spin cycle and after 1-2 tries, it will work. Any ideas? Thank you!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Wednesday, June 24, 2015 2:53:48 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. You may have a problem with a slow drain. You have mentioned that water stays in the tub after the end of the cycle. You need to check the drain hoses and the drain pump for clogs. Unplug the washer and remove the kick panel (two screws at the bottom of the kick panel). Take off the big hose connecting the tub and the pump and clean it out. Part number: AP2107618 Ignore the video it's being removed. Also check the pump inlet and impeller for debris. Here are the breakdown diagrams and parts list for your washer Model FWT647GHS0 Good luck. Please post the results. Thank you, Simon.


User Profile View All Posts by User View Thanks

jamesm113		#3 Posted : Monday, August 24, 2015 4:31:11 PM(UTC)
Rank: Member Groups: Registered Joined: 6/23/2015(UTC) Posts: 3		Hi Simon, Sorry for the delayed response. I pulled all the hoses & drain pump, but found no clogs. After cleaning them out (there was some amount of stuff in them), the issue still persists. What's the next thing to try? Thanks, James


User Profile View All Posts by User View Thanks

jamesm113		#4 Posted : Friday, November 20, 2015 12:24:02 PM(UTC)
Rank: Member Groups: Registered Joined: 6/23/2015(UTC) Posts: 3		Hi Simon, Any ideas? Thanks, James


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close