Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Rock  
#1 Posted : Friday, February 8, 2008 1:39:45 PM(UTC)
Rock

Rank: Member

Groups: Registered
Joined: 2/8/2008(UTC)
Posts: 2

Can someone help ? I am replacing a old Gaffers & Sattler gas oven thermostat (part #993-453) with the recommended Maytag replacement part Manufacturer's # 7404P066-60 (part # AP379254) and have received the replacement part but, the two terminals on the replacement part are not marked. The old part (#993-453) is marked with a BKE for one terminal and L1 for the other terminal. Since the replacement part is totally different in looks than the original part and the terminals not marked I am lost as to reconnecting the two oven wires to the two UNMARKED terminals on the replacement part (if connected wrong and blows replacement part, warranty is no good). Again, the replacement part is somewhat different in looks, smaller and both UNMARKED terminals protrude in a different direction. None of this is a problem as long as I can get the oven wires connected to the replacement part thermostat terminals correctly. Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Rock  
#2 Posted : Wednesday, February 13, 2008 1:46:39 PM(UTC)
Rock

Rank: Member

Groups: Registered
Joined: 2/8/2008(UTC)
Posts: 2

Because it is a gas oven it does not matter how the oven wires are connected to the terminals. It is now connected and, up and running.:) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :)
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.