HELP! Cannot find compressor HP for replacement parts - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

HELP! Cannot find compressor HP for replacement parts Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: AES44B	Brand: -other-	Age: 5 - 10 years
Previous Topic Next Topic

Leans		#1 Posted : Thursday, February 7, 2013 4:25:32 PM(UTC)
Rank: Member Groups: Registered Joined: 2/7/2013(UTC) Posts: 2		I have a Haier AES44b. I would like to replace the start relay and overload for the compressor which is an LG ma53lbcm 115v/60Hz but I cannot find the HP rating anywhere please help!!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Friday, February 8, 2013 3:00:17 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Is the old start device a large box, or two discrete devices, an overload and small, black or brown ptc device.


User Profile View All Posts by User View Thanks

Leans		#3 Posted : Friday, February 8, 2013 3:06:46 PM(UTC)
Rank: Member Groups: Registered Joined: 2/7/2013(UTC) Posts: 2		Thanks for answering. The compressor currently has a small black start relay and a small white overload. These components are separate. They are very similar to the pieces shown in these links: http://www.******************...Relay/6748C0004D/1268268 http://www.******************...verload/265RFBYY/1206539


User Profile View All Posts by User View Thanks

richappy		#4 Posted : Friday, February 8, 2013 3:18:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Pull off the ptc start device and measure ohms between the two, round output pins, should be 5 to 10 ohms. Also, check the overload, should be about zero ohms. If you have no meter, either get one, or have it tested. If you cannot get the original devices, you must be carefull, selecting the wrong items, or improperly wiring them will burn out your compressor.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close