kenmore wont agitate or spin, only fills and drains - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

kenmore wont agitate or spin, only fills and drains Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 2262210	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

ineedhelp52		#1 Posted : Sunday, December 9, 2012 8:12:34 AM(UTC)
Rank: Member Groups: Registered Joined: 12/9/2012(UTC) Posts: 2		Washer fills and drains water, but doesnt spin or agitate, i dont want to call a repair guy so he can charge me $75 to tell me whats wrong if its somethin gsimple


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Tuesday, December 11, 2012 4:59:44 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Your model number is incomplete, but this is a basic Whirlpool top loader, (you can tell because the model number starts with '110') then it sounds like the coupler. It is a reasonable DIY fix, and if you look up the part here you will find a nice video that will show you how to fix it. It helps, a lot, to have a helper.


User Profile View All Posts by User View Thanks

ges99		#3 Posted : Monday, December 9, 2013 9:37:39 AM(UTC)
Rank: Member Groups: Registered Joined: 12/9/2013(UTC) Posts: 2		It fills but I don't know about emptying since I just drained the tub when it wouldn't start a cycle.


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Monday, December 9, 2013 3:24:05 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Ges99 If you will post a model number and give us a little more detail on the problem and how the machine acts we may be able to help you. Thanks


User Profile View All Posts by User View Thanks

ges99		#5 Posted : Monday, December 9, 2013 3:37:00 PM(UTC)
Rank: Member Groups: Registered Joined: 12/9/2013(UTC) Posts: 2		My Kenmore washer is model 110.24732300 purchased 8/23/2004. When you set it on any cycle and pull the knob outward the tub will fill. But after that nothing happens: no washing, spinning nor emptying of tub. Thanks ges99?


User Profile View All Posts by User View Thanks

sidfink43		#6 Posted : Monday, December 9, 2013 4:28:49 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		If you move the dial to the drain part of the cycle and nothing happens than the likely culprit is your lid switch. You can test it by bypassing the lid switch, and if you need to replace the switch it is an easy fix. See the video on replacing Whirlpool Direct Drive lid switch in the video library here, or go to the lid switch part listing and you should see a link to the video.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close