I have no oven Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: RS675PXGB15	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

skeezic3		#1 Posted : Thursday, August 27, 2009 8:13:03 AM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2009(UTC) Posts: 12		Whirlpool oven stopped working after the cleaning cycle completed. The oven and the cooktop are separate. The cooktop works fine. Thank you.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Frank / APP Team		#2 Posted : Thursday, August 27, 2009 11:36:06 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: skeezic3 Whirlpool oven stopped working after the cleaning cycle completed. The oven and the cooktop are separate. The cooktop works fine. Thank you. Do you have any display in the clock?
User Profile View All Posts by User View Thanks

skeezic3		#3 Posted : Thursday, August 27, 2009 11:55:01 AM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2009(UTC) Posts: 12		Yes, the CLOCK and controls for the oven work. Just no heat.
User Profile View All Posts by User View Thanks

Frank / APP Team		#4 Posted : Thursday, August 27, 2009 12:15:32 PM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: skeezic3 Yes, the CLOCK and controls for the oven work. Just no heat. Look and see if the bake element has any bubbles or holes in it. If nothing is obvious you'll need to use a volt/ohm meter to check to see if it's good or not. Make sure you remove power from unit before pulling out the element. Below is a link to a parts breakdown. Model RS675PXGB15
User Profile View All Posts by User View Thanks

skeezic3		#5 Posted : Thursday, August 27, 2009 4:52:51 PM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2009(UTC) Posts: 12		Pulled the elements, they both had continuity and checked out at 28 OHMS. There are no bubbles or cracks in them.
User Profile View All Posts by User View Thanks

Frank / APP Team		#6 Posted : Friday, August 28, 2009 7:29:32 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: skeezic3 Pulled the elements, they both had continuity and checked out at 28 OHMS. There are no bubbles or cracks in them. You'll need to remove back panel and look for burnt wire, also ohm out the below part, which is a thermal fuse. After that you're probably looking at the electronic control. Part number: AP3885687
User Profile View All Posts by User View Thanks

skeezic3		#7 Posted : Friday, August 28, 2009 11:43:56 AM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2009(UTC) Posts: 12		I am just checking for continuity or a specific resistance.
User Profile View All Posts by User View Thanks

skeezic3		#8 Posted : Friday, August 28, 2009 11:43:56 AM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2009(UTC) Posts: 12		I am just checking for continuity or a specific resistance.
User Profile View All Posts by User View Thanks

Frank / APP Team		#9 Posted : Friday, August 28, 2009 12:04:26 PM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: skeezic3 I am just checking for continuity or a specific resistance. Continuity. Needs to be a closed circuit.
User Profile View All Posts by User View Thanks

skeezic3		#10 Posted : Monday, September 21, 2009 1:02:25 PM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2009(UTC) Posts: 12		I now have an oven! Thank you so much!! It was indeed the thermal fuse. Your service is awesome. My compliments to your knowledge and expertise.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)