Ice maker won't flow water or harvest ice Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 106.53662300	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

mvenable		#1 Posted : Monday, July 20, 2009 7:22:21 PM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2009(UTC) Posts: 6		I have a kenmore s/s refrigerator that won't flow water into icemaker after harvesting ice. I have tested valve and manually flowed water through tube and water flowed and valve checked out good with ohm meter. Water still will not flow for the 5-8 seconds after harvesting ice
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Tuesday, July 21, 2009 12:27:33 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Pull out the ice maker but do not unplug it. Remove the head cover (on the left side) and perform the troubleshooting as described in one of our previous posts: http://forum.appliancepartspros...-maker-quit-working.html. Post the results. Gene.
User Profile View All Posts by User View Thanks

mvenable		#3 Posted : Thursday, July 23, 2009 10:08:45 AM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2009(UTC) Posts: 6		NL showed 110VAC, TH did not energize motor.
User Profile View All Posts by User View Thanks

mvenable		#4 Posted : Thursday, July 23, 2009 10:41:46 AM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2009(UTC) Posts: 6		Checking continuity on the motor wires read 4Kohms.
User Profile View All Posts by User View Thanks

mvenable		#5 Posted : Thursday, July 23, 2009 11:29:38 AM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2009(UTC) Posts: 6		Also, what is the normal position of the ejector. Is it with points facing the freezer door or facing towards the back of the freezer. Right now it is facing the freezer door. The part number of my icemaker is 106.2198597. Finally foound the manual and drawing shows the points facing the freezer door.
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Thursday, July 23, 2009 12:06:27 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Looks like at least the ice maker thermostat has gone bad. Possible something else is bad as well. I would recommend to replace the whole ice maker. - Whirlpool ice maker part number 2198597 is APP Part number: AP3182733 Gene.
User Profile View All Posts by User View Thanks

mvenable		#7 Posted : Thursday, July 23, 2009 2:27:55 PM(UTC)
Rank: Member Groups: Registered Joined: 7/19/2009(UTC) Posts: 6		Don't know what happened but it made a batch of ice, ejected and refilled water and is freezing new ice:confused: . Should I still consider replacing? Thank you for your help!
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Thursday, July 23, 2009 4:28:47 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Do not do anything as long as it works. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)