Rank: Member
Groups: Registered
Joined: 7/14/2011(UTC) Posts: 1
|
Cutting ice grid is not cutting the ice. I removed and cleaned it. all wires and connections look good.
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 2/14/2011(UTC) Posts: 816
|
Hello b015dwj. You will want to test the grid cutter and make sure it is good. It should read closed for continuity. If it is good, you will need to test and see if there is power coming to the transformer and from the transformer to the grid cutter. You should have 120 VAC coming to the transformer. It is low voltage coming out and you should read between 8 to 12 VAC. If not, you will need to replace the transformer. Hope this helps. Part number: AP3956373
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close