Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
FoleyPhoto  
#1 Posted : Tuesday, February 17, 2009 9:35:39 AM(UTC)
FoleyPhoto

Rank: Member

Groups: Registered
Joined: 2/17/2009(UTC)
Posts: 1

Hi, My dishwasher just went dead mid-cycle. It is filled with water, but did not get to the point where it pops open the soap. The panel does not light up at all. The house circuit breaker did not trip, and if I plug it into another outlet, it does not turn on either. All lights are off on the panel. Is there some sort of fuse or circuit breaker on the unit itself that I can reset? Or is there a part that I can buy and replace? Thanks. FoleyPhoto
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jdappl07  
#2 Posted : Tuesday, February 17, 2009 6:44:22 PM(UTC)
jdappl07

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/22/2007(UTC)
Posts: 81

check the wirenuts at the bottom see if they are not burned or if they are on good. if good it will most likely be the control board or a wire came off
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.