Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
madikenn  
#1 Posted : Tuesday, May 17, 2011 7:50:54 PM(UTC)
madikenn

Rank: Member

Groups: Registered
Joined: 5/13/2011(UTC)
Posts: 2

I replaced a broken motor coupler on my washer. I put it all back together and the motor isn't working at all now. Before I replaced it the motor worked fine. I can also still spin the agitator both ways.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Wednesday, May 18, 2011 1:34:48 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If the motor makes no sounds at all, I would check for a partially seated plug on the side, or a bent/pushed out pin.
Users browsing this topic
Similar Topics
Motor coupler keeps breaking (Washer Repair)
by Tobyiscute 1/25/2016 8:27:49 AM(UTC)
Burning smell after replacing motor coupler (Washer Repair)
by Beerman_Supreme 6/8/2011 3:56:54 AM(UTC)
Squealing noise after changing Motor Coupler (Washer Repair)
by DanPizano 4/10/2011 11:06:41 AM(UTC)
Motor Coupler (Washer Repair)
by Moxleysr 2/4/2011 7:09:14 AM(UTC)
Washer, Kenmore 90Series Replaced motor coupler, now makes very loud noise/whistle (Washer Repair)
by Allen74 10/22/2010 12:12:20 PM(UTC)
how do you know if the motor coupler is bad? (Washer Repair)
by LHERD 12/26/2009 5:52:25 AM(UTC)
new motor coupler doesn't fit (Washer Repair)
by TDM 12/4/2009 2:41:55 PM(UTC)
Motor coupler (Washer Repair)
by DIYMom2 10/6/2009 4:10:40 PM(UTC)
Need info for replacing motor coupler (Washer Repair)
by uijongbu72 6/7/2009 11:06:17 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.