Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bobmc53  
#1 Posted : Thursday, March 10, 2011 2:24:43 PM(UTC)
bobmc53

Rank: Member

Groups: Registered
Joined: 3/10/2011(UTC)
Posts: 3

how would I check what has failed on my freezer ? overload protector ,starter PTC , or run capacitor? I turn the temp down and it hums , then clicks and shuts down .:confused: I have both digital & analog testers ?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Friday, March 11, 2011 7:24:58 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Pull off the compressor side cover and remove the start device. If it rattles when shaken, it's bad, order it here AP2112343, a low, low price $2.42. Usually run capacitors don't fail, but make sure you plug it in the new start device.
I would also use a 1000joule surge protector on the outlet, will prevent future failures.
bobmc53  
#3 Posted : Friday, March 11, 2011 1:36:06 PM(UTC)
bobmc53

Rank: Member

Groups: Registered
Joined: 3/10/2011(UTC)
Posts: 3

Thank You , For the speedy reply ! The part is now ordered , and will be arriving on 3/15/11 .
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.