Maytag Gas Dryer heat on and off - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Maytag Gas Dryer heat on and off Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: SDG305DAWW	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

leelim		#1 Posted : Wednesday, December 15, 2010 10:21:17 AM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2010(UTC) Posts: 3		Hi The dryer is heating okay from a cold start, it turns off the heat after about 5 minutes. It will not heating at after that till is quite cool, before I will heat again. When I removed the front panel to view the igniter, When it does heat, the igniter will get red hot, light the gas and the dryer will heat but it appears that after the heat turn off or I open the dryer and restart it the igniter turn red hot for about 15 second but no gas coming, thus no heat. The igniter will cycling this pattern about 5-6 times, before it finally ignite and heat up again. Can you tell me what part may have gone bad and how to diagnose it myself at home. Is there a repair manual available it I want to replace it myself? Thanks for your help. Leelim


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

kayakcrzy		#2 Posted : Wednesday, December 15, 2010 1:14:12 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		Replace the coils on the gas valve, and that will do it. A quick and easy, and cheap repair. Tom Appliance Educator, Appliance Parts, Washer and Dryer Parts, Refridgerator and Freezer Parts, Stove and Oven Parts


User Profile View All Posts by User View Thanks

leelim		#3 Posted : Wednesday, December 15, 2010 3:08:56 PM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2010(UTC) Posts: 3		While disconnecting the wires from coils, we tripped the circuit (unit were not unplug). Now, the ignitor glows continuesly but no gas flow or flame at all. Not sure what had went wrong? Please advise.


User Profile View All Posts by User View Thanks

kayakcrzy		#4 Posted : Thursday, December 16, 2010 3:30:16 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		What do you mean continuously? It never shuts off now?????


User Profile View All Posts by User View Thanks

leelim		#5 Posted : Friday, December 17, 2010 7:15:29 AM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2010(UTC) Posts: 3		Yes. the ignitor come on stay on red and never go off, we reserch a bit and our thought is the flame sensor may has been shorted, as the the resistant is registered as 0 ohm. It that make sense??


User Profile View All Posts by User View Thanks

kayakcrzy		#6 Posted : Saturday, December 18, 2010 2:28:02 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		Yes, I would agree, about the flame sensor being shorted. Because it should shut the ignitor off, if the gas valve is bad, or the coils on the gas valve are bad. I would go with the flame sensor. So, when you replace it, and the ignitor comes on, and no gas, then shuts off, you could have damaged the gas valve. I would change the flame sensor. I think that will do it. Tom ApplianceEducator.com


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close