GE Washer not draining or spinning, but will agitate and fill- Page 3 - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

3 Pages<1 23

GE Washer not draining or spinning, but will agitate and fill Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: -brand-	Age: Less than 1 year
Previous Topic Next Topic

aokay1		#21 Posted : Tuesday, November 22, 2011 1:01:37 PM(UTC)
Rank: Member Groups: Registered Joined: 11/22/2011(UTC) Posts: 4		Originally Posted by: magician59 Have towels ready, because there will be water involved. The pump is the small motorized component with the hoses attached to it. Unplug the machine (Water and electricity really DO mix...and it's DEADLY.). Detatch the hoses from the pump and the tub. Check those places for items of clothing, lint clogs, or other foreign material that can block the drainage. The pump is anchored by one or two screws and the wire connector. Remove the pump and look into it for foreign material. Remove the blockages that you might find and re-connect everything. Check the operation of the machine. It will run with the front panel off, so you can observe it. If it drains after removing any clogs, You're done. Tell us what you find. I took your advice and so far so good! There was the cotton from inside of the pillow blocking the pump. I have only finished the load that wouldn't drain and did one test run! But it has been a success thus far! Thank You!


User Profile View All Posts by User View Thanks

Guest		#22 Posted : Friday, November 4, 2022 1:50:50 PM(UTC)
Rank: Guest Groups: Guests Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		Thank you as well this worked for me!


User Profile View All Posts by User View Thanks

Guest		#23 Posted : Saturday, December 24, 2022 11:52:47 AM(UTC)
Rank: Guest Groups: Guests Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		This is really cool I think I have a similar problem I will go through the same process to see if that fixes my machine


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

3 Pages<1 23

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close