Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

3 Pages<123
Options
Go to last post Go to first unread
GARY-L  
#21 Posted : Wednesday, January 26, 2011 9:45:42 AM(UTC)
GARY-L

Rank: Member

Groups: Registered
Joined: 12/29/2010(UTC)
Posts: 11

Joe....

Keep Up The Good Work!

Gary
Joe / APP Team  
#22 Posted : Wednesday, January 26, 2011 11:13:06 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: GARY-L Go to Quoted Post
Joe....

Keep Up The Good Work!

Gary



I'll try,

You do the same,

Thanks

:cool: :cool: :cool:
mtauber19  
#23 Posted : Wednesday, February 22, 2012 5:57:03 PM(UTC)
mtauber19

Rank: Member

Groups: Registered
Joined: 1/1/2012(UTC)
Posts: 1

We have a jenn-air svu48600 and am getting an pf during cooking when the oven gets hot about 400 degrees. we replaced the panel board with a new one because our oven is 12 years old. Everything else works fine, but now its starting to fail. Replaced the board but are getting an f-7 error message and the clock doesn't work either.
Joe / APP Team  
#24 Posted : Thursday, February 23, 2012 6:00:30 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: mtauber19 Go to Quoted Post
We have a jenn-air svu48600 and am getting an pf during cooking when the oven gets hot about 400 degrees. we replaced the panel board with a new one because our oven is 12 years old. Everything else works fine, but now its starting to fail. Replaced the board but are getting an f-7 error message and the clock doesn't work either.


Mtauber, First off, the F7 error code, usually indicates a "stuck" keypab on the control panel mwmbrane pad. You said you replaced the "panel board", If you mean the digital display in the front, you need to check and make sure you have the ribbon connector properly and tightly inserted and attached to the control, then replace the control panel.

Part number: AP4088890
Part number: AP4088890


Check and make sure the cooling fan comes on within a few minutes when you program a self clean cycle, That will tell us if the cooling fan is operable and we can start to consider the main relay board,on the back of the range,

Part number: AP4008573
Part number: AP4008573


When the board deteriorates, you can, and will get a lot of irratic problems and issues.

Thanks and Good Luck,

:) :) :)
Users browsing this topic
Guest (4)
3 Pages<123
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.