Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
disassemble front of washer
Options
Go to last post Go to first unread
Model: ATF 6000ES 1 Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
sling  
#1 Posted : Friday, August 8, 2008 2:49:49 PM(UTC)
sling

Rank: Member

Groups: Registered
Joined: 8/8/2008(UTC)
Posts: 5
Hi, the door of my front loader won't lock, I have replaced the striker, but the part inside that receives it needs to be replaced. I have ordered the part, but do not know how to take the front of the washer off. Any help would be greatly appreciated!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
abadfish66  
#2 Posted : Friday, August 8, 2008 2:53:06 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
The model# does not come up, can you check and repost
Back to top
sling  
#3 Posted : Friday, August 8, 2008 2:58:19 PM(UTC)
sling

Rank: Member

Groups: Registered
Joined: 8/8/2008(UTC)
Posts: 5
ATF6000ES1 Frigidaire Affinity Front Load Washer. I am sure of the model #. Thanks
Back to top
abadfish66  
#4 Posted : Friday, August 8, 2008 3:00:24 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
I believe you dont need to remove the front to change it. Look at the front of the rubber boot that attaches to the front of the washer, there may be a ring around it with a spring attached, if so, remove the ring and pull the boot off the front lip. with this off you should be able to unscrew the latch bracket and pull it over to disconnect the wiring and install the new one.
Back to top
sling  
#5 Posted : Friday, August 8, 2008 3:02:44 PM(UTC)
sling

Rank: Member

Groups: Registered
Joined: 8/8/2008(UTC)
Posts: 5
I will give that a try - it makes sense. Thanks!!
Back to top
sling  
#6 Posted : Friday, August 8, 2008 4:33:23 PM(UTC)
sling

Rank: Member

Groups: Registered
Joined: 8/8/2008(UTC)
Posts: 5
i can't figure how to pull it out. there is a finger hole - don't see a spring. any tips?
Back to top
abadfish66  
#7 Posted : Friday, August 8, 2008 5:01:18 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Pull what out?
Back to top
misterfixall  
#8 Posted : Friday, August 8, 2008 5:24:22 PM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
when you recieve the door latch the installation instruction should come with it
Back to top
sling  
#9 Posted : Friday, August 8, 2008 5:35:44 PM(UTC)
sling

Rank: Member

Groups: Registered
Joined: 8/8/2008(UTC)
Posts: 5
TO PULL OUT THE BOOT (QUEST FROM ABADFISH66)

Thanks for the note that instal instruct will come with part.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET