Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
tehackett  
#1 Posted : Thursday, November 17, 2016 5:54:46 PM(UTC)
tehackett

Rank: Member

Groups: Registered
Joined: 11/17/2016(UTC)
Posts: 1

I am trying to replace a chest freezer thermostat and the probe is stuck in the tube. How do I get it out correctly without ruining anything? It is a 1986 Kenmore model 198.8151525 if that helps any. I have pulled pretty hard on it and it just doesn't want to come loose and slide out. I also took a piece of wire and have pushed it up the tube along side the probe trying to see if it were plugged or frozen and it went in a long way with no issues.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
rg.splich  
#2 Posted : Monday, December 4, 2017 12:27:52 PM(UTC)
rg.splich

Rank: Member

Groups: Registered
Joined: 12/4/2017(UTC)
Posts: 1

te,

I've encountered exactly the same problem. If that monster weren't so big and worked so well, I'd replace it.

I was not able to probe the tube as far as you did - I used some piano wire and it stopped at about 4 inches deep no matter how I worked it.

There has to be a way to remove that capillary, how else would they have repaired it back in the day? If I find out how it is removed, I certainly will post it here.

Good luck,
Rich
Droid69  
#3 Posted : Saturday, February 13, 2021 11:29:54 AM(UTC)
Droid69

Rank: Member

Groups: Registered
Joined: 2/13/2021(UTC)
Posts: 0

Anyone ever find out the answer to this? I'm having the same issue.
Guest  
#4 Posted : Saturday, May 28, 2022 7:20:53 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
am trying to replace a chest freezer thermostat and the probe is stuck in the tube. ... Stock up on groceries with this GE manual defrost chest freezer. G E 7 cu Ft chest freezer
Guest  
#5 Posted : Tuesday, July 5, 2022 8:33:23 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Anyone figure it out. Same issue here!
Guest  
#6 Posted : Saturday, September 3, 2022 4:18:08 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Is it possible the probe is attached to something ? I don’t get it
Gene  
#7 Posted : Saturday, September 3, 2022 6:38:30 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
In order to provide most accurate advice we need the complete model number of the refrigerator. It's also better to register on the forum.
Guest  
#8 Posted : Sunday, September 4, 2022 4:20:13 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Ok I got my stuck probe out, sprayed power lube up the tube a couple times , let it soak a long day, clamped visegrip on the end probe and tapped it with a small hammer. It started to move and then pulled it out . Hope this helps, hate to see a good freezer scrapped
Gene  
#9 Posted : Sunday, September 4, 2022 5:57:52 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Thank you for your reply. It was very helpful.
Gene.
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.