No Hot or warm water Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 16852503	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

invader37		#1 Posted : Friday, June 16, 2017 7:56:36 AM(UTC)
Rank: Member Groups: Registered Joined: 12/27/2011(UTC) Posts: 5		No hot or cold water. Changed temperature switch. No help. Changed water inlet and sensor just in case and no help. Get 120v at cold valve with switch set at "Cold", but only getting 2v at Hot valve when switch set at"Hot'. Checked resistance on Inlet assemblies and they are the same on both new and old. Is new switch bad the only option left?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

invader37		#2 Posted : Friday, June 16, 2017 8:00:40 AM(UTC)
Rank: Member Groups: Registered Joined: 12/27/2011(UTC) Posts: 5		Originally Posted by: invader37 No hot or cold water. Changed temperature switch. No help. Changed water inlet and sensor just in case and no help. Get 120v at cold valve with switch set at "Cold", but only getting 2v at Hot valve when switch set at"Hot'. Checked resistance on Inlet assemblies and they are the same on both new and old. Is new switch bad the only option left? Question should read no Hot or warm water.
User Profile View All Posts by User View Thanks

invader37		#3 Posted : Friday, June 16, 2017 8:01:31 AM(UTC)
Rank: Member Groups: Registered Joined: 12/27/2011(UTC) Posts: 5		Originally Posted by: invader37 No hot or warm water. Changed temperature switch. No help. Changed water inlet and sensor just in case and no help. Get 120v at cold valve with switch set at "Cold", but only getting 2v at Hot valve when switch set at"Hot'. Checked resistance on Inlet assemblies and they are the same on both new and old. Is new switch bad the only option left? Question should read no Hot or warm water.
User Profile View All Posts by User View Thanks

brobriffin		#4 Posted : Friday, June 16, 2017 11:59:33 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		First rule out bad hot valve. change the wires from the cold valve to the hot valve. run a cold cycle and see if hot valve opens.
		WWW
User Profile View All Posts by User View Thanks

invader37		#5 Posted : Friday, June 16, 2017 1:35:15 PM(UTC)
Rank: Member Groups: Registered Joined: 12/27/2011(UTC) Posts: 5		I had actually switched the hot and cold inputs before installing the new switch. Not having a wiring diagram. I changed the valve assembly thinking maybe the sensor might be able to shut off the hot if the sensor was bad,
User Profile View All Posts by User View Thanks

brobriffin		#6 Posted : Friday, June 16, 2017 4:34:47 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		this model does not appear to have an actual temp sensor it is controlled by the water temp switch ok so when you had the wiring backwards did the hot water work?
		WWW
User Profile View All Posts by User View Thanks

invader37		#7 Posted : Friday, June 16, 2017 5:34:43 PM(UTC)
Rank: Member Groups: Registered Joined: 12/27/2011(UTC) Posts: 5		Yes, I had hot water with the cold line connected to hot valve input
User Profile View All Posts by User View Thanks

brobriffin		#8 Posted : Saturday, June 17, 2017 8:18:30 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Ok so the valve is not the issue. Like you said you were only getting 2 volts to the hot water side. Therefore your water temp switch is likely the culprit here. Now for the bad news, whirlpool has discontinued this part. It may be available with a search thru the web or other secondary aftermarkets. The part number you will nee to look for is 8571735
		WWW
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

Similar Topics

No hot or warm water in washer/dryer combo (Washer Repair) by Shelbel 3/12/2013 11:22:15 AM(UTC)

Maytag Atlantis Washer No Hot Or Warm Water (Washer Repair) by jakemdr 3/4/2010 7:46:38 PM(UTC)