Washing Machine Wont Agitate Or Spin Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 110.92597200	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

SCOTT1946		#1 Posted : Monday, January 23, 2017 12:31:34 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2017(UTC) Posts: 6		Washing machine wont agitate or spin. Coupler is not damaged. Help
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

ThatGuy		#2 Posted : Monday, January 23, 2017 2:07:04 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		Will it fill with water and then drain the water out? Does the motor run or do anything?
User Profile View All Posts by User View Thanks

SCOTT1946		#3 Posted : Monday, January 23, 2017 2:26:10 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2017(UTC) Posts: 6		fills with water...drains water but no agitation or spin. 'Kenmore 90 series model
User Profile View All Posts by User View Thanks

SCOTT1946		#4 Posted : Monday, January 23, 2017 2:27:35 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2017(UTC) Posts: 6		motor sounds like it is running
User Profile View All Posts by User View Thanks

ThatGuy		#5 Posted : Monday, January 23, 2017 4:09:41 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		Pull the motor off and check behind it. See if the end parts of the coupling still firmly attached to their shafts. If the coupling isn't damaged, by hand try turning the half attached to the gearcase. If you turn it one way it should spin and if you turn it the other way it should agitate.
User Profile View All Posts by User View Thanks

SCOTT1946		#6 Posted : Monday, January 23, 2017 5:15:41 PM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2017(UTC) Posts: 6		sorry just got your notice. the shaft turns both ways
User Profile View All Posts by User View Thanks

ThatGuy		#7 Posted : Monday, January 23, 2017 6:30:16 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		Does this happen? "If the coupling isn't damaged, by hand try turning the half attached to the gearcase. If you turn it one way it should spin and if you turn it the other way it should agitate." You should be able to make the washer spin or agitate by hand.
User Profile View All Posts by User View Thanks

SCOTT1946		#8 Posted : Tuesday, January 24, 2017 5:27:39 AM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2017(UTC) Posts: 6		when i turn it both ways it agitates both way. no spin
User Profile View All Posts by User View Thanks

SCOTT1946		#9 Posted : Tuesday, January 24, 2017 8:46:30 AM(UTC)
Rank: Member Groups: Registered Joined: 1/23/2017(UTC) Posts: 6		Well I guess you can call me a dummy. Went back and look closely at the coupling. Notice one hole on the rubber part was cracked and broken. Decided to invest a few coins to see if that fixed the problem. Of course it did. Had I looked more closely the first time I wouldn't have wasted your time. Thanks anyhow for the help.
User Profile View All Posts by User View Thanks

ThatGuy		#10 Posted : Tuesday, January 24, 2017 11:11:58 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		When you said it would drain. I figured your coupling was bad. A lot of the time they just wear off the flat spots inside and that's all it takes. The last design of coupling is the best.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)