Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bigherb2  
#1 Posted : Sunday, August 3, 2014 6:40:32 AM(UTC)
bigherb2

Rank: Member

Groups: Registered
Joined: 8/3/2014(UTC)
Posts: 5

Please help....my compressor and the fan at the bottom both run but niether the fridge or freezer gets cold
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
bfridge  
#2 Posted : Sunday, August 3, 2014 8:09:33 PM(UTC)
bfridge

Rank: Member

Groups: Registered
Joined: 7/24/2014(UTC)
Posts: 17

When you say the fan at the bottom, do you mean the compressor fan?
First I would check to make sure that the condenser coils are clean. If they are dirty, they will not properly cool down and your fridge will not get cold enough.
Next, I would check to make sure that the evaporator fan inside your fridge is working. This helps to move the cold air around. At the same time you can check to make sure that there is no ice build up on the evaporator coils.
richappy  
#3 Posted : Monday, August 4, 2014 1:52:06 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If the compressor is warm and vibrating, you have a serious sealed system problem.
bigherb2  
#4 Posted : Monday, August 4, 2014 4:58:08 PM(UTC)
bigherb2

Rank: Member

Groups: Registered
Joined: 8/3/2014(UTC)
Posts: 5

The fan in the fridge will not come on.I unpluged the fan and put my dc volt meter on the 3prongs ....I believe the top two gave me like 98 volts dc when I shouldve had like 13
bigherb2  
#5 Posted : Monday, August 4, 2014 4:59:54 PM(UTC)
bigherb2

Rank: Member

Groups: Registered
Joined: 8/3/2014(UTC)
Posts: 5

My coils look clean but I will spray them with coil cleaner.but my fan inside the fridge wont come on
bigherb2  
#6 Posted : Monday, August 4, 2014 5:02:18 PM(UTC)
bigherb2

Rank: Member

Groups: Registered
Joined: 8/3/2014(UTC)
Posts: 5

The evap. Fan wont come on .I read somewhere to check voltage at the j2 pin but no where on the motherboard can I find a j2 pin
bigherb2  
#7 Posted : Monday, August 4, 2014 5:03:12 PM(UTC)
bigherb2

Rank: Member

Groups: Registered
Joined: 8/3/2014(UTC)
Posts: 5

How would I fix a serious sealed system problem
richappy  
#8 Posted : Tuesday, August 5, 2014 12:47:40 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
That problem makes the fridg terminal unless a real expensive one.; should confirm first.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.