Whirlpool Duet Dryer - No Heat Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GGW9250PW3	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

BobBear4		#1 Posted : Saturday, August 24, 2013 5:13:45 AM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2013(UTC) Posts: 6		I have a Whirlpool Duet Dryer, Model GGW9250PW3, that is not heating. After following the excellent advice on this site, I replaced the moisture sensor bars, thermal fuse, thermistor, gas coils, and the igniter (parts purchased from AppliancePartsPros.com). The dryer worked for fine one day and now the problem has recurred - dryer not heating. Any suggestions? Thanks.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

HumboldtRepairMan		#2 Posted : Saturday, August 24, 2013 8:32:46 AM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		Check your gas supply pressure. Check your plug make sure you have good polarity. Check all thermostats through the heating system you just replaced the thermister but didn't test the rest of the thermostats? Take them out and shake them see if you hear alot of rattling. Here's a helpful video. Gas Dryer Repair Video: Heating Problems - YouTube
User Profile View All Posts by User View Thanks

BobBear4		#3 Posted : Saturday, August 24, 2013 12:21:12 PM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2013(UTC) Posts: 6		Thanks, HumboldtRepairMan. The gas and electrical supply to the dryer are good. The thermostat also checks good. It is rather confusing, since it worked perfectly after replacing all of the parts - but stopped after only one day. It appears like the only thing left to replace is the control board.
User Profile View All Posts by User View Thanks

BobBear4		#4 Posted : Saturday, August 31, 2013 6:06:40 AM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2013(UTC) Posts: 6		The mystery continues. I replaced the control board, flame sensor, and high limit thermostat. Rechecked the resistance of the gas coils and the voltage supply to the igniter. Still no heat... Anyone have any suggestions? Thanks.
User Profile View All Posts by User View Thanks

HumboldtRepairMan		#5 Posted : Saturday, August 31, 2013 6:13:05 AM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		Checked voltage to ignitor and made sure it's 120v?
User Profile View All Posts by User View Thanks

BobBear4		#6 Posted : Saturday, August 31, 2013 6:16:30 AM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2013(UTC) Posts: 6		Yes - 120v at the igniter.
User Profile View All Posts by User View Thanks

HumboldtRepairMan		#7 Posted : Saturday, August 31, 2013 6:25:19 AM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		If you have 120v to the ignitor the control appears to be working properly in that aspect and if the coils you bought were good it should work unless your gas valve is bad and not releasing that's the only thing left i can think of if you have good gas pressure and have checked all the thermostats. Damn Duets! They can be a pain lol
User Profile View All Posts by User View Thanks

BobBear4		#8 Posted : Saturday, August 31, 2013 6:39:13 AM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2013(UTC) Posts: 6		Thanks, HumboldtRepairMan. I was wondering if the coils I got from AppliancePartsPros.com were bad - but a resistance check shows them to be okay. It is really driving me crazy, since the dryer worked for one day after replacing the coils and other parts. I'm wondering if I should order another set with a gas valve, call a repairman, or just replace the dryer! Again, thanks.
User Profile View All Posts by User View Thanks

HumboldtRepairMan		#9 Posted : Saturday, August 31, 2013 6:41:17 AM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		You can send parts back and i'd suggest the whole valve assembly they usually have the ignitor and coils included but make sure they do before ordering. Or go on craigs list and find one that works fine from someone moving for 100 bucks.........make sure to test at least 20-30 minutes though if it a gas dryer because it takes that long to recognise coil or burner issues sometimes
User Profile View All Posts by User View Thanks

BobBear4		#10 Posted : Saturday, August 31, 2013 7:25:40 AM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2013(UTC) Posts: 6		Thanks, again - HumboldtRepairMan. The whole valve assembly is available - but not in stock. I'm going to call AppliancePartsPros and see what my options are for returning the parts, since I did not save the original packaging.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (8)

Similar Topics

Whirlpool Duet dryer - no heat (Dryer Repair) by colino 3/19/2018 10:56:53 AM(UTC)