Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
whirlpool double oven control panel DEAD!
Options
Go to last post Go to first unread
Model: RBD306PDT14 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
dozija  
#1 Posted : Friday, January 1, 2010 7:49:08 AM(UTC)
dozija

Rank: Member

Groups: Registered
Joined: 1/1/2010(UTC)
Posts: 1
I had both ovens going the other day. After ending the bake cycles, the panel just went dead! Black! If I open the oven doors, the lights turn on. If I push the start button I get a dit daaaa dit dit dit sound. But other than that, no action. I turned off the breaker box to try to "reboot" it, but no go. Nothing. I hope there is something easy to fix that I am overlooking. I've never had problems with my ovens before! Thanks in advance for any help.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, January 3, 2010 5:48:35 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for WHIRLPOOL RBD306PDT14 30" Built - in Electric Double Oven Self - Clean Upper and Lower Ovens | AppliancePartsPros.com

Here is the tech sheet
Replacement parts for WHIRLPOOL RBD306PDT14 30" Built - in Electric Double Oven Self - Clean Upper and Lower Ovens | AppliancePartsPros.com

And a manual
https://secured.whirlpoo...524e76/$FILE/8178007.pdf

Could be the control board transformer thermal fuse is blown, see page 3-2 in the manual.
Unplug the unit and check it with a meter.
If OK
Check the transformer windings
Note that is always safer to try and find the fault with the power off as 240 volts is lethal.
If OK
Check that the transformer is getting power should be 120 volts on the primary. Check that the voltage suppressor is OK.
Check that the transformers secondary is putting out voltage, I beleive it is 24 volts AC.
THIS FORUM IS DEAD!!!!!!!
Back to top
ms.nita  
#3 Posted : Wednesday, July 13, 2011 9:04:51 AM(UTC)
ms.nita

Rank: Member

Groups: Registered
Joined: 7/13/2011(UTC)
Posts: 2
My oven has the very same problem. I was told the control panel needs to be replaced, but that part is not available and on back order! I'm thinking that is a widespread problem. My oven is about 7 years old.
Back to top
ms.nita  
#4 Posted : Thursday, July 14, 2011 2:44:33 PM(UTC)
ms.nita

Rank: Member

Groups: Registered
Joined: 7/13/2011(UTC)
Posts: 2
Originally Posted by: ms.nita Go to Quoted Post
My oven has the very same problem. I was told the control panel needs to be replaced, but that part is not available and on back order! I'm thinking that is a widespread problem. My oven is about 7 years old.



Just found out from whirlpool today, they no longer make the part I need! Now I need a new oven....it won't be a whirlpool! :mad:
Back to top
Rafasan  
#5 Posted : Wednesday, October 17, 2012 1:40:52 PM(UTC)
Rafasan

Rank: Member

Groups: Registered
Joined: 10/17/2012(UTC)
Posts: 2
I have the Whirlpool Double Oven and the control panel went out after 4 or 5 years. It has now gone out again. And it's not cheap!! Can't believe it. Must a design flaw in this model cause others have reported the same thing.
Back to top
denman  
#6 Posted : Wednesday, October 17, 2012 11:05:47 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Rafasan

Are you sure it is the control board or has it blown the thermal fuse that kills power to the board?
THIS FORUM IS DEAD!!!!!!!
Back to top
Rafasan  
#7 Posted : Thursday, October 18, 2012 6:52:29 AM(UTC)
Rafasan

Rank: Member

Groups: Registered
Joined: 10/17/2012(UTC)
Posts: 2
yes, I checked the fuse and it's fine.
Back to top
Hacksaw77  
#8 Posted : Tuesday, February 11, 2014 8:17:45 AM(UTC)
Hacksaw77

Rank: Member

Groups: Registered
Joined: 2/11/2014(UTC)
Posts: 1
Mine did this before. Left the power off for a while and when power came back on it was fine. It has been 2 years since then and it just went out again. Same issues, light works, beeps when you touch buttons. I will try leaving power off for an hour like before.
Back to top
jimslax  
#9 Posted : Friday, June 20, 2014 7:36:06 PM(UTC)
jimslax

Rank: Member

Groups: Registered
Joined: 6/23/2011(UTC)
Posts: 2
I have had the same problem with my oven shutting down, then coming back to life for no reason. I just noticed this week that it has been back up for the past week and the only thing I can think of that has changed is the humidity has been high for the past week. It is still lit up as I write this and this has not happened for longer than a day or two for the past year. I will be checking on this for a while to see if it is the humidity that is affecting this, and if so, will be doing something to make the humidity high around the oven.
Back to top
ortis  
#10 Posted : Thursday, January 21, 2016 9:22:02 AM(UTC)
ortis

Rank: Member

Groups: Registered
Joined: 1/21/2016(UTC)
Posts: 1
Originally Posted by: dozija Go to Quoted Post
I had both ovens going the other day. After ending the bake cycles, the panel just went dead! Black! If I open the oven doors, the lights turn on. If I push the start button I get a dit daaaa dit dit dit sound. But other than that, no action. I turned off the breaker box to try to "reboot" it, but no go. Nothing. I hope there is something easy to fix that I am overlooking. I've never had problems with my ovens before! Thanks in advance for any help.


WE were cooking same thing happened as you, we get no oven light, no codes or sound?
:confused:
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET