5 Pages<12345> Go to Page...

GE Profile freezer too cold, fridge too warm Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

rgill		#21 Posted : Tuesday, June 19, 2012 2:56:55 PM(UTC)
Rank: Member Groups: Registered Joined: 3/23/2012(UTC) Posts: 26		Gene - it appears as if there is NO airflow into the frig. The freezer is now at 15 degrees. This happens periodically as well. thanks for any info you might have on the cause. Rebecca
User Profile View All Posts by User View Thanks

Gene		#22 Posted : Tuesday, June 19, 2012 4:08:15 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Rebecca, You have to have an ohmmeter and the refrigerator thermometer to perform the next step of the troubleshooting. Let me know when you will be ready. Gene.
User Profile View All Posts by User View Thanks

rgill		#23 Posted : Tuesday, June 19, 2012 4:12:37 PM(UTC)
Rank: Member Groups: Registered Joined: 3/23/2012(UTC) Posts: 26		i have a thermometer, but, need to check on borrowing the ohmeter. Can i start with one? Rebecca
User Profile View All Posts by User View Thanks

rgill		#24 Posted : Tuesday, June 19, 2012 4:26:14 PM(UTC)
Rank: Member Groups: Registered Joined: 3/23/2012(UTC) Posts: 26		now i have both the Ohmeter and the thermometer. thanks, rebecca
User Profile View All Posts by User View Thanks

Gene		#25 Posted : Tuesday, June 19, 2012 4:31:54 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Place the thermometer in the fresh food compartment. Unplug the refrigerator. Pull it out of the wall and remove the cover from the main control board. Remove the J1 plug from the control board. Set the ohmmeter on a highest scale. Measure the resistance between the wires connected to the J1-5 & J1-1 and the J1-5 and J1-2. Post the results and the temperature in the fresh food compartment at that time. Gene.
User Profile View All Posts by User View Thanks

rgill		#26 Posted : Tuesday, June 19, 2012 4:39:45 PM(UTC)
Rank: Member Groups: Registered Joined: 3/23/2012(UTC) Posts: 26		are the j1 & j2 plugs clearly marked. i am now getting in a little over my head! Thanks
User Profile View All Posts by User View Thanks

Gene		#27 Posted : Tuesday, June 19, 2012 4:48:12 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		We are talking about J1 plug only. The numbers after dash are numbers of the terminals/wires connected to that plug. It should be marked. Gene.
User Profile View All Posts by User View Thanks

rgill		#28 Posted : Tuesday, June 19, 2012 5:28:37 PM(UTC)
Rank: Member Groups: Registered Joined: 3/23/2012(UTC) Posts: 26		J1 - 5 008, J1-1 000, j1 - 5 008 and j1 - 2 009, term 58 degrees. sounds greek to me! what does this tell you? thanks, Rebecca
User Profile View All Posts by User View Thanks

Gene		#29 Posted : Tuesday, June 19, 2012 5:32:48 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I'm afraid I did not get it clear. Can you describe step by step how did you do it please? Gene.
User Profile View All Posts by User View Thanks

rgill		#30 Posted : Wednesday, June 20, 2012 5:59:31 AM(UTC)
Rank: Member Groups: Registered Joined: 3/23/2012(UTC) Posts: 26		we unplugged the frig, pulled off the j1 piece from the circuit board, then put the positive probe on the first metal spike and the negative on the 5th metal spike(for lack of a better term)and got a reading. Then, did the same with spike one and two. does that make sense? thanks, Rebecca
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

5 Pages<12345> Go to Page...