Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Need to tap temperature panel to make it start up
Options
Go to last post Go to first unread
Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
lisadunphy  
#1 Posted : Monday, June 11, 2012 7:14:29 AM(UTC)
lisadunphy

Rank: Member

Groups: Registered
Joined: 6/11/2012(UTC)
Posts: 3
I have a WHirlpool side by side. I have found that to keep it at a steady termperature I need to occasionally open the fridge side door and tap (or bang) on the panel at the top that has the slider temperature settings. I do this and the unit turns on. I forget to and ice starts melting and the whole unit gets too warm. What needs to be fixed?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Monday, June 11, 2012 8:28:17 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You probably have a sticking cold control, mode # would help.
Back to top
lisadunphy  
#3 Posted : Monday, June 11, 2012 8:44:41 AM(UTC)
lisadunphy

Rank: Member

Groups: Registered
Joined: 6/11/2012(UTC)
Posts: 3
Model # ED5FHAXSQ00
Back to top
richappy  
#4 Posted : Monday, June 11, 2012 8:57:24 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Drop the control panel and tap on the cold control or the adaptive defrost board.
Back to top
lisadunphy  
#5 Posted : Monday, June 18, 2012 5:08:15 AM(UTC)
lisadunphy

Rank: Member

Groups: Registered
Joined: 6/11/2012(UTC)
Posts: 3
Originally Posted by: richappy Go to Quoted Post
Drop the control panel and tap on the cold control or the adaptive defrost board.


Do I need to replace something? There is nothing in the part diagram called [FONT='Verdana','sans-serif']cold control or the adaptive defrost board[/FONT]
Back to top
richappy  
#6 Posted : Tuesday, June 19, 2012 2:34:42 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Just drop the control panel and tap on the pc board or control.
Back to top
denman  
#7 Posted : Tuesday, June 19, 2012 3:37:40 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for Whirlpool ED5FHAXSQ00 Refrigerator | AppliancePartsPros.com

Cold control is Item 9 in Section 3 (thermostat)
Adaptive defrost board is Item 6 in Section 3 (CNTRL-ELEC)

The next time it happens just move the freezer temperature control up/down a bit, if the unit/compressor starts then that is the part I would replace.
Do not turn it all the way down to off.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET