Ice Dispencer stops dispencing - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Ice Dispencer stops dispencing Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MZD2663KEQ	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

jmclanton		#1 Posted : Tuesday, May 29, 2012 10:03:40 AM(UTC)
Rank: Member Groups: Registered Joined: 5/29/2012(UTC) Posts: 5		Ice stops dispencing, I have replaced the auger motor & hex cap (looked a litte worn). I removed the ice bin and ran the auger motor with door open and the motor runs fine for about 10 seconds but starts to bog down and stops running. After a couple mintues of letting is sit it will start up and then quit again. This is a new auger motor I purchase from Parts Select a few weeks ago and still can't figure out what is wrong with it not dispencing the ice properly. Please advise.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Tuesday, May 29, 2012 12:58:06 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Check the run capacitor Part number: 65889-4 The info is on the capacitor. Here are the breakdown diagram and Freezer compartment replacement parts for Maytag MZD2663KEQ REF - SXS/I&W \| AppliancePartsPros.com Thank you. Post thew results. Simon.


User Profile View All Posts by User View Thanks

jmclanton		#3 Posted : Tuesday, November 27, 2012 8:35:17 AM(UTC)
Rank: Member Groups: Registered Joined: 5/29/2012(UTC) Posts: 5		Hi, I replaced the capacitor Part number: 65889-4 that was recommended but still having the same problem, it stops dispencing ice. Any other suggestions? Thank you, Julie M. Clanton:confused:


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Tuesday, November 27, 2012 2:32:03 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Did it work for some time? Simon.


User Profile View All Posts by User View Thanks

jmclanton		#5 Posted : Saturday, December 1, 2012 2:36:44 PM(UTC)
Rank: Member Groups: Registered Joined: 5/29/2012(UTC) Posts: 5		It will run for about 20 seconds than stops but If I remove the ice bin and hold the button down it will run longer.


User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Monday, December 3, 2012 9:42:14 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		HI. Can you check what is the voltage at the auger motor? Simon.


User Profile View All Posts by User View Thanks

jmclanton		#7 Posted : Monday, December 10, 2012 8:31:59 AM(UTC)
Rank: Member Groups: Registered Joined: 5/29/2012(UTC) Posts: 5		Originally Posted by: Simon / APP Team HI. Can you check what is the voltage at the auger motor? Simon. 110-120 V is what is on the sticker for the auger motor. Julie


User Profile View All Posts by User View Thanks

Simon / APP Team		#8 Posted : Monday, December 10, 2012 9:32:34 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi, Julie. I asked you to check the actual voltage at the auger motor wile it's running. You need to use the voltmeter. Simon.


User Profile View All Posts by User View Thanks

jmclanton		#9 Posted : Monday, December 10, 2012 9:46:19 AM(UTC)
Rank: Member Groups: Registered Joined: 5/29/2012(UTC) Posts: 5		Originally Posted by: Simon / APP Team Hi, Julie. I asked you to check the actual voltage at the auger motor wile it's running. You need to use the voltmeter. Simon. Don't have one. Julie


User Profile View All Posts by User View Thanks

Simon / APP Team		#10 Posted : Monday, December 10, 2012 10:23:35 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Without doing the test my best guess it's a bad control board Part number: 67006743 Located in the dispenser 07-Fountain parts for Maytag MZD2663KEQ - AppliancePartsPros.com Good luck. Simon.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close