Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

22 Pages«<1415161718>»
Options
Go to last post Go to first unread
mbrahmer  
#151 Posted : Thursday, May 24, 2012 3:44:44 PM(UTC)
mbrahmer

Rank: Member

Groups: Registered
Joined: 5/16/2012(UTC)
Posts: 14

Not too much; I used a hair dryer to thaw them and it thawed very quickly.
Mark
Gene  
#152 Posted : Thursday, May 24, 2012 3:58:43 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Mark,

When I asked how bad it was frozen I meant if the air flow could go through. And what about rest of the coils? How they were covered or they were clean?

Gene.
mbrahmer  
#153 Posted : Thursday, May 24, 2012 4:07:59 PM(UTC)
mbrahmer

Rank: Member

Groups: Registered
Joined: 5/16/2012(UTC)
Posts: 14

Not that bad. I used a hair dryer and the ice melted very quickly.
Mark
mbrahmer  
#154 Posted : Thursday, May 24, 2012 4:09:21 PM(UTC)
mbrahmer

Rank: Member

Groups: Registered
Joined: 5/16/2012(UTC)
Posts: 14

Sorry, I missed your last post.
I'd say that some air could get past the coils. Most of the rest of them were clean.
Mark
mbrahmer  
#155 Posted : Friday, May 25, 2012 10:35:02 AM(UTC)
mbrahmer

Rank: Member

Groups: Registered
Joined: 5/16/2012(UTC)
Posts: 14

Gene,
I got the evaporator motor test done: voltages are good. When I plugged the motor back in it started running; probably still need to replace it??

Other problem is that the fan in the custom cool section is still not running. I pulled the fan out and it runs with 12VDC applied to it. Other issue is that the wiring harness that came with the fan from you is not the right one: I have no 9 pin connectors on my model. What controls this fan?

Thanks,
Mark
Gene  
#156 Posted : Friday, May 25, 2012 2:31:56 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: mbrahmer Go to Quoted Post
...Most of the rest of them were clean...


Hi Mark,

I'm afraid the problem is there and not the fan in custom cool section. That fan does nothing else but maintain a set temperature in this section only.

The evaporator coils should be about 100% covered with thin frost. If most of them were clean then the sealed system can be low on Freon which causing warmer temperature in both freezer and fresh food compartments. Double check the evaporator coils and post the result.

Gene.
mbrahmer  
#157 Posted : Saturday, May 26, 2012 8:37:39 AM(UTC)
mbrahmer

Rank: Member

Groups: Registered
Joined: 5/16/2012(UTC)
Posts: 14

Gene,
The evap coils have a nice uniform light layer of frost on them this morning; temps in the freezer=0, temp in frige=36.

I need to send the custom cool fan & harness back since I didn't need it. Do I need an RMA or what?
Thanks,
Mark
Gene  
#158 Posted : Saturday, May 26, 2012 12:53:41 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Mark,

It's still not clear what is wrong. You have to keep it under control for some more time.

Gene.
mbrahmer  
#159 Posted : Saturday, May 26, 2012 1:14:00 PM(UTC)
mbrahmer

Rank: Member

Groups: Registered
Joined: 5/16/2012(UTC)
Posts: 14

Will do. I have reassembled the FF side and left the freezer apart. Since the evap fan was not running and now it has been for about 24 hours, would you recommend I replace it?
Thanks,
Mark
mbrahmer  
#160 Posted : Tuesday, May 29, 2012 8:09:10 AM(UTC)
mbrahmer

Rank: Member

Groups: Registered
Joined: 5/16/2012(UTC)
Posts: 14

Gene,
The frige is working well over the weekend FF @ 37 and FZ @ 0.
What do you think?
The latest numbers are: frige @40 Freezer @ -4 and fan over evap not running; coils are frosted.
Thanks,
Mark
Users browsing this topic
Guest (2)
22 Pages«<1415161718>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.