Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

21 Pages«<45678>»
Options
Go to last post Go to first unread
arnieg  
#51 Posted : Friday, August 29, 2008 5:31:32 AM(UTC)
arnieg

Rank: Member

Groups: Registered
Joined: 2/23/2008(UTC)
Posts: 4

I had the same problem with the same oven. The solution was to provide some insulation in the control wires. The procedure was developed by Charlie Popeck and is described at

The Dreaded "F7" Error - FixYa
eyecu1965dad  
#52 Posted : Sunday, October 5, 2008 5:47:50 PM(UTC)
eyecu1965dad

Rank: Member

Groups: Registered
Joined: 10/5/2008(UTC)
Posts: 1

Originally Posted by: Gene Go to Quoted Post
Hi SMIMS,

In order to provide most accurate advise I need the complete model number of the range.

Gene.

are model number is fgfl67dbd, it is a gas range oven. it goes into the f10 mode all the time. while we are trying to use the oven to cook.what do i need to do to fix this problem. any help would be greatly appreciated.
Gene  
#53 Posted : Monday, October 6, 2008 4:56:31 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
eyecu1965dad,

"F10" error code means runaway temperature. Check resistance of the oven temperature probe (aka temperature sensor). Normally it suppose to be about 1100 Ohms at the room temperature.

If the reading is wrong then replace the sensor.

If the reading is correct then replace the Electronic Oven Control (EOC).

- The part number for the oven temperature sensor is AP3704441

- The part number for the EOC is AP3778770

Gene.
mabeck52  
#54 Posted : Thursday, November 6, 2008 7:16:13 AM(UTC)
mabeck52

Rank: Member

Groups: Registered
Joined: 11/6/2008(UTC)
Posts: 1

I have a Tappan range, error code F10 (not on the list). What does this mean? Easy to fix? Costly?
Gene  
#55 Posted : Thursday, November 6, 2008 10:21:43 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
mabeck52,

What is the complete model number of the range?

Gene.
eastex  
#56 Posted : Saturday, November 22, 2008 5:43:59 PM(UTC)
eastex

Rank: Member

Groups: Registered
Joined: 11/22/2008(UTC)
Posts: 2

Range, Maytag; MN CRE9600CCE;
Just replaced bottom oven element. It works fine, but will not turn off. Oven overheats and I am getting a F2 code and then an F7 code. Cancel button or oven stop button will not turn oven element off. Must unplug to turn off. Clock and other buttons as well as temp display seem to work OK. Oven stop button does turn temp display off.

HELP
shela  
#57 Posted : Wednesday, November 26, 2008 1:30:15 PM(UTC)
shela

Rank: Member

Groups: Registered
Joined: 11/26/2008(UTC)
Posts: 1

:confused: i need to know how to fix a f1 err
Gene  
#58 Posted : Wednesday, November 26, 2008 3:27:04 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Shela,

What is the complete model number of the range?

Gene.
Gene  
#59 Posted : Thursday, November 27, 2008 11:42:22 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
eastex,

The problem with your oven is a relay on the control board stuck closed. The control board has to be replaced.

- The part number for the control board is AP4008548

Here are the break down diagrams for the Maytag range Model CRE9600CCE

Gene.
eastex  
#60 Posted : Saturday, November 29, 2008 7:05:58 PM(UTC)
eastex

Rank: Member

Groups: Registered
Joined: 11/22/2008(UTC)
Posts: 2

Thanks Gene. I suspected that was the problem, and chose to replace the range since it was 12 years old and probably not worth the cost of repair.

Thanks for the reply and the info.
Users browsing this topic
Guest (5)
Similar Topics
Thermador Oven error codes (Oven Repair (including Ranges and Cooktops))
by jblake9000 9/25/2015 9:01:34 AM(UTC)
Oven Error Codes & Won't Heat Fully (Oven Repair (including Ranges and Cooktops))
by davem68 4/18/2013 7:46:23 AM(UTC)
Whirlpool oven error codes (Oven Repair (including Ranges and Cooktops))
by ajsml 9/10/2012 10:21:53 AM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by fred jacoby 4/4/2012 9:44:17 AM(UTC)
Oven error codes (Oven Repair (including Ranges and Cooktops))
by sigman 3/23/2012 9:08:14 AM(UTC)
kENMORE OVEN ERROR CODES E3 FI (Oven Repair (including Ranges and Cooktops))
by chrisb361 12/11/2011 3:37:20 PM(UTC)
Whirlpool Electic oven error codes (Oven Repair (including Ranges and Cooktops))
by fcarrelli 9/7/2010 5:56:53 AM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 4:58:30 PM(UTC)
Oven error codes F3 and F2 (Oven Repair (including Ranges and Cooktops))
by emidgette 6/1/2010 4:56:50 PM(UTC)
GE Oven error codes (Oven Repair (including Ranges and Cooktops))
by BobChurch 9/1/2009 4:51:40 PM(UTC)
GE oven error codes (Oven Repair (including Ranges and Cooktops))
by bdeinhardt@aol.com 6/25/2009 5:47:37 AM(UTC)
Whirlpool Double Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by alaucks 1/14/2009 9:31:27 AM(UTC)
oven error codes (Oven Repair (including Ranges and Cooktops))
by cndybkr 9/29/2008 12:13:03 PM(UTC)
Additional Oven Error Codes (Oven Repair (including Ranges and Cooktops))
by indydoug 11/15/2007 6:43:00 PM(UTC)
21 Pages«<45678>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.