Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Sear Radiant free-standing range error code F2
Options
Go to last post Go to first unread
Model: 911.99004991 Brand: Sears Age: 5 - 10 years
Previous Topic Next Topic
gregoz  
#1 Posted : Monday, March 28, 2011 2:21:38 PM(UTC)
gregoz

Rank: Member

Groups: Registered
Joined: 3/28/2011(UTC)
Posts: 4
My wife went to use our oven today, and in the middle of her baking, the code F2 showed up on the display, and the store started beeping. Unplug the stove, let it cool off, and plug it back in, and the F2/beeping starts all over again.

Any suggestion on what could be causing this and where I could test / part(s) to buy to replace to get the stove back in operation??

TIA,
Greg
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
gregoz  
#2 Posted : Tuesday, March 29, 2011 10:17:53 AM(UTC)
gregoz

Rank: Member

Groups: Registered
Joined: 3/28/2011(UTC)
Posts: 4
Originally Posted by: gregoz Go to Quoted Post
My wife went to use our oven today, and in the middle of her baking, the code F2 showed up on the display, and the store started beeping. Unplug the stove, let it cool off, and plug it back in, and the F2/beeping starts all over again.

Any suggestion on what could be causing this and where I could test / part(s) to buy to replace to get the stove back in operation??

TIA,
Greg


So after unplugging/plugging the unit in after it had cooled off, and getting the same F2 code, tried sliding the oven's lock latch back and forth a few times, leaving it slid all the way to the left. Now, plug back in the unit to the wall, and it powers on and no more F2 code. :)
Back to top
gregoz  
#3 Posted : Tuesday, March 29, 2011 11:01:51 AM(UTC)
gregoz

Rank: Member

Groups: Registered
Joined: 3/28/2011(UTC)
Posts: 4
Originally Posted by: gregoz Go to Quoted Post
So after unplugging/plugging the unit in after it had cooled off, and getting the same F2 code, tried sliding the oven's lock latch back and forth a few times, leaving it slid all the way to the left. Now, plug back in the unit to the wall, and it powers on and no more F2 code. :)


Back to square one... After being plugged in for about 20 minutes w/no beeping/F2 code, the range on its own started beeping and flashing F2 again. All the burners, and the stove have been off the entire time. :mad: Suggestions appreciated...
Back to top
Gene  
#4 Posted : Tuesday, March 29, 2011 3:59:54 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sounds like the problem is a bad control board aka an Electronic Range Control.

- The ERC Part number: AP2633044
Part number: AP2633044

Gene.
Back to top
gregoz  
#5 Posted : Tuesday, March 29, 2011 4:24:01 PM(UTC)
gregoz

Rank: Member

Groups: Registered
Joined: 3/28/2011(UTC)
Posts: 4
Originally Posted by: Gene Go to Quoted Post
Sounds like the problem is a bad control board aka an Electronic Range Control.

- The ERC Part number: AP2633044
Part number: AP2633044

Gene.

Gene-

Thanks for the advise, I agree. I've taken the unit out, and found 2 bad (arc'ed) relays

Thanks,
Greg
Back to top
Gene  
#6 Posted : Tuesday, March 29, 2011 6:00:01 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome Greg. Keep us posted.

Gene.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET