Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Ken Derrick  
#1 Posted : Friday, September 12, 2008 4:21:31 PM(UTC)
Ken Derrick

Rank: Member

Groups: Registered
Joined: 9/12/2008(UTC)
Posts: 3

The washer fills and washes ok. Right before it gets to the rinse cycle, it shuts off. No draining,refilling, or spinning. The machine just stops. It will come back on if timer is set at beginning of cycle,but stops running again before it gets to rinse.Any suggestions?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Friday, September 12, 2008 4:49:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Ken,

Most likely the problem is a bad lid switch. For more accurate advise we need the complete model number of the washer.

Gene.
Drags1998  
#3 Posted : Friday, September 12, 2008 4:59:24 PM(UTC)
Drags1998

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750

GENE's Correct, I'll bet its the lid switch!!!!!!!! To test it open the console and locate the 3 wire connector, unplug the connector and "JUMP" the 2 outside wires (Gray,I think)with a piece of insulated wire. This connector is MOUNTED to the top of the washer a little to the right of center near the back.
Ken Derrick  
#4 Posted : Monday, September 15, 2008 2:00:31 PM(UTC)
Ken Derrick

Rank: Member

Groups: Registered
Joined: 9/12/2008(UTC)
Posts: 3

Originally Posted by: Drags1998 Go to Quoted Post
GENE's Correct, I'll bet its the lid switch!!!!!!!! To test it open the console and locate the 3 wire connector, unplug the connector and "JUMP" the 2 outside wires (Gray,I think)with a piece of insulated wire. This connector is MOUNTED to the top of the washer a little to the right of center near the back.




Thank you! You were correct. I spliced the 2 wires together and eliminated the switch. Just have to remember not to put my hand in there during the spin cycle.
Ken Derrick  
#5 Posted : Monday, September 15, 2008 2:01:34 PM(UTC)
Ken Derrick

Rank: Member

Groups: Registered
Joined: 9/12/2008(UTC)
Posts: 3

Thanks Gene.It was the lid switch.
Gene  
#6 Posted : Monday, September 15, 2008 2:16:38 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You're welcome Ken.

Gene.
Users browsing this topic
Guest (2)
Similar Topics
Speed Queen washer problem (Washer Repair)
by Guest 7/21/2023 1:04:45 PM(UTC)
Kenmore Series 80 washer problem (Washer Repair)
by sarahs 3/13/2023 5:55:33 PM(UTC)
Kenmore Elite Dishwasher Problem (Dishwasher Repair)
by AndyH01 3/31/2022 3:33:31 AM(UTC)
GE washer Problems w/ Agitation GCWN3000M1WS (Washer Repair)
by ps33 12/19/2020 4:19:13 PM(UTC)
Kitchenaid dishwasher problem - water path question (Dishwasher Repair)
by bmsamson 2/6/2020 9:03:09 AM(UTC)
Kenmore VMW 22352 Washer Problems (Washer Repair)
by Papa_omero 3/11/2019 5:25:53 PM(UTC)
Whirlpool Duet Sport Washer problems (Washer Repair)
by bdmbluegrass 1/11/2017 11:54:22 AM(UTC)
Washer problem (Washer Repair)
by Roseazbell@gmail.com 10/22/2016 1:18:49 PM(UTC)
Whirlpool gold washer problem on spin cycle (Washer Repair)
by Bblazek 9/21/2015 7:31:09 AM(UTC)
Dishwasher Problem (Dishwasher Repair)
by 7Bucks 7/23/2015 11:29:42 AM(UTC)
Dishwasher problem (Dishwasher Repair)
by malinz 7/10/2015 5:38:35 AM(UTC)
dishwasher problem (Dishwasher Repair)
by pstreet40 5/23/2015 9:15:33 AM(UTC)
Kenmore 80 Series Washer problem (Washer Repair)
by castora5 4/15/2015 7:30:44 PM(UTC)
washer problems (Washer Repair)
by porterbridges 1/18/2015 10:53:23 AM(UTC)
Washer problem (Washer Repair)
by dennis h etzler 1/4/2015 6:37:41 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.