Rank: Member
Groups: Registered
Joined: 9/17/2010(UTC)
Posts: 2
|
Washer leaks massive amount of water on the floor during spin cycle only. I think it's only during large loads. It doesn't appear to be coming from the drain hose, but from underneath. What can I do to diagnose the problem? What are the most likely causes? Thanks!
Deborah
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: Deborah in Seattle  Washer leaks massive amount of water on the floor during spin cycle only. I think it's only during large loads. It doesn't appear to be coming from the drain hose, but from underneath. What can I do to diagnose the problem? What are the most likely causes? Thanks!
Deborah Deborah, A proper model and serial number would help. But based on your description, Remove the washer front panel,( 2, 5/16 inch screws on the bottom corners of the front panel, swing the panel out at the bottom until the top clips release). Run the washer through a cycle until it starts to leak, Most likely you'll need to look on the bottom center of the tub assembly for water leaking down the transmission or out the rubber seal . (tub bearing and seal assembly(s). You will be able to see all of the interior hoses and connections and should be able to track your leak down from there. Drop us a line, if you need more nassistance. :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
