Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
3 Pages123>
F 10
Options
Go to last post Go to first unread
Model: FEFL67DCK Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
bubbastockton  
#1 Posted : Tuesday, January 1, 2008 1:02:21 PM(UTC)
bubbastockton

Rank: Member

Groups: Registered
Joined: 1/1/2008(UTC)
Posts: 4
My oven will not work. The error code is F 10. What would the problem be. Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, January 2, 2008 10:24:17 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The "F10" error code means the runaway temperature.

Check the resistance across the oven temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control).

It suppose to be about 1100 Ohms at the room temperature.

If the reading is wrong, check the resistance at the oven probe plug.

If the reading is wrong - replace the oven temperature probe.

If the readings right - check the wire harness from the temperature probe to the EOC.

If there is nothing wrong with the oven temperature probe, then replace the EOC. You can use the old overlay or replace it too.

- The part number for the oven temperature probe is AP3704441

- The part number for the EOC is AP3776874

- The part number for the black overlay is AP3778486


Good luck.
Gene.
Back to top
bubbastockton  
#3 Posted : Wednesday, January 2, 2008 12:42:53 PM(UTC)
bubbastockton

Rank: Member

Groups: Registered
Joined: 1/1/2008(UTC)
Posts: 4
Will check the oven shortly. Thanks
Back to top
Gene  
#4 Posted : Wednesday, January 2, 2008 12:47:56 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Keep me updated, please.

Gene.
Back to top
bubbastockton  
#5 Posted : Wednesday, January 2, 2008 2:31:18 PM(UTC)
bubbastockton

Rank: Member

Groups: Registered
Joined: 1/1/2008(UTC)
Posts: 4
I just checked this oven and the resistance was about 1040-1050 at the terminal block and the probe. Does that mean the probe was good? All the wiring looks fine. Is the only other thing it could be is the EOC? Thanks so much for your help!!
Back to top
Gene  
#6 Posted : Wednesday, January 2, 2008 2:56:23 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Yes, in such situation the only thing it could be is the EOC.

Gene.
Back to top
bubbastockton  
#7 Posted : Wednesday, January 9, 2008 1:38:44 PM(UTC)
bubbastockton

Rank: Member

Groups: Registered
Joined: 1/1/2008(UTC)
Posts: 4
replaced the EOC today and it fixed the problem. Thanks for all your help:) :) :D
Back to top
Gene  
#8 Posted : Wednesday, January 9, 2008 3:56:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I'm glad you were able to fix it.

Best regards.
Gene.
Back to top
cjtyo  
#9 Posted : Wednesday, July 2, 2008 10:22:39 AM(UTC)
cjtyo

Rank: Member

Groups: Registered
Joined: 7/2/2008(UTC)
Posts: 3
Gene,

I have the same F 10 issue going on with my 790.961* model Kenmore electric range with glass cooktop.

My question for you is where these parts you say to test are located in my oven - the manual is less than helpful for locating operating parts.

So, where is "the oven temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control)"?

Where is "the oven probe plug" if I have to test that too?

Where is "the wire harness from the temperature probe to the EOC"?

Thank you!
C
Back to top
Gene  
#10 Posted : Wednesday, July 2, 2008 11:00:56 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
cjtyo,

In order to provide most accurate advise we need the complete model number of the range.

Gene.
Back to top
Users browsing this topic
Guest (6)
Similar Topics
gas range fault F 10 (Oven Repair (including Ranges and Cooktops))
by ddlong 9/13/2010 9:32:25 AM(UTC)
Can I use 20w bulbs instead of 10w to light cooktop? (Microwave Repair)
by Daniel J 2/28/2010 4:22:05 PM(UTC)
LG Electric dryer will not shut off 10 seconds after starting (Dryer Repair)
by miketieman 1/8/2010 3:02:54 PM(UTC)
Kenmore Wall Oven F 10 Fault (Oven Repair (including Ranges and Cooktops))
by Bigben 1/18/2009 10:46:53 AM(UTC)
Water Heater Relays click on/off 10-20 times (General Talk)
by markwrightjohnson 11/16/2008 11:44:23 AM(UTC)
Oven temp off 100 degrees (Oven Repair (including Ranges and Cooktops))
by S Brown 10/30/2008 6:44:37 AM(UTC)
3 Pages123>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET