Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

207 Pages«<7677787980>»
Options
Go to last post Go to first unread
Gene  
#771 Posted : Wednesday, April 7, 2010 2:45:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Jody,

Remove the damper (#115 on the diagram) and check the motor and switch for continuity, and mechanical parts of it. If there is nothing wrong then the problem very likely is a bad adaptive defrost control.

- The damper Part number: AP3958400
Part number: AP3958400



- The ADC Part number: AP3959125
Part number: AP3959125



Gene.
hd4ou  
#772 Posted : Wednesday, April 7, 2010 4:24:41 PM(UTC)
hd4ou

Rank: Member

Groups: Registered
Joined: 11/29/2009(UTC)
Posts: 8

Hey Gene, I found a guy here that had a spare dampner. Put it all together and plugged it in and the dampner motor open up then closed and cycled like this 3 or 4 time over a 5 minute period then it just stayed closeed and 3 hours later it still appears to be closed. Still think its the adaptive frost control or is there something else that is susposed to keep the dampner open??
Gene  
#773 Posted : Wednesday, April 7, 2010 5:21:21 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If you are sure that this spare damper is good, then the problem very likely is a bad ADC. Unfortunately there are no manuals for this model.

Gene.
hd4ou  
#774 Posted : Wednesday, April 7, 2010 8:04:16 PM(UTC)
hd4ou

Rank: Member

Groups: Registered
Joined: 11/29/2009(UTC)
Posts: 8

well im not sure but it appears to be functional. i mean its a 120 volt motor with a micro switch on the cam that interrupts power to the motor when opened. im assuming there is some sort of control that stops rotation at some point.. both the motor and micro switch appear to be operating as they should. i must admit i am unsure what it is that makes the dampner remain open at a certain point. im certainly not disputing your suggestion.. simply just wondering how it works.. i will see if this local guy has a spare controller and let you know. im guessing its the flat square box under the housing by the dampner about 3 x 4 inchs correct? thanks again Gene...
Gene  
#775 Posted : Wednesday, April 7, 2010 11:48:06 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
According to the wiring diagram the power to the damper motor comes from the ADC, but the position of the damper gate controls by the refrigerator temperature control (thermostat). It is possible the temperature control is bad as well, but you can check it for continuity.

Gene.
EVERAM  
#776 Posted : Thursday, April 8, 2010 7:43:39 AM(UTC)
EVERAM

Rank: Member

Groups: Registered
Joined: 4/5/2010(UTC)
Posts: 9

Hi! I just wanted to thank you, your info was very useful, change the fan motor, was pretty easy, everything is working fine, you are doing a great service, thank you so much. Eve
Slashz28  
#777 Posted : Thursday, April 8, 2010 11:29:33 AM(UTC)
Slashz28

Rank: Member

Groups: Registered
Joined: 4/6/2010(UTC)
Posts: 5

Awesome !!:) Thank you very much Gene. I may just buy all 3 parts and just replace them. Saves the time troubleshooting, and this way all those components are new.

Thank you very much once again!

Cheers

Tom
hd4ou  
#778 Posted : Thursday, April 8, 2010 3:54:38 PM(UTC)
hd4ou

Rank: Member

Groups: Registered
Joined: 11/29/2009(UTC)
Posts: 8

ok Gene, i got a thermostat control from Mr. Sellars and checked mine first. notta. installed his and wal lah. everything working great. thanks for the diagram. you are exactly right. thermostat controls dampner position.. this ones quite a bit more complicated than my whirlpool dampner system...thanks again...Jody
Gene  
#779 Posted : Friday, April 9, 2010 10:15:48 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome Eve. I'm glad you were able to fix it.

Gene.
Gene  
#780 Posted : Friday, April 9, 2010 10:17:50 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome Tom.

Most likely all three new parts will fix it, but there is a very small chance that without the proper diagnosis there is something else wrong.

Good luck,
Gene.
Users browsing this topic
Guest (2)
Similar Topics
Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by mrhoagie 11/3/2012 1:46:58 PM(UTC)
Another Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by rzeune 10/7/2010 9:19:39 AM(UTC)
Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by allemich 4/19/2009 8:02:07 PM(UTC)
207 Pages«<7677787980>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.