Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
larryk13  
#1 Posted : Friday, March 19, 2010 7:52:08 AM(UTC)
larryk13

Rank: Member

Groups: Registered
Joined: 3/19/2010(UTC)
Posts: 4

Good day folks, hopefully, someone can help me with my issue. 2 weeks ago, oven failed to 'turn on + preheat'. So, i thought the bake element was fried and i replaced it. then the problem changed. now oven goes on to preheat, but does not 'turn off' and i get error code F 10 = runaway temp all the time. so, i said maybe its the temp probe. so i replaced the probe. no change. i'm guessing the only thing left it could be is the 'brains' = electronic board. problem is, when i went to various websites to find the appropriate part, i was unsure which one it was. there are two 'control' type units listed, and the part description/picture is non clear. one says clock/timer, looks like a small board and costs between 150 and 200 (depending upon store). the other looks like a control board also, about the same size, and costs approximately 75 dollars. i'm guessing the one i want is the more expensive one, but would like to know for sure before purchasing so i dont get the wrong one.
THANKS!!! larry
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, March 19, 2010 11:33:16 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for FRIGIDAIRE FEFL79GBA Frigidaire/range | AppliancePartsPros.com

Here is a wiring diagram
http://manuals.frigidaire.com/prodinfo_pdf/Springfield/316441481en.pdf

Control board is F20 in Section 1.
Not sure what other part you are referring to.
THIS FORUM IS DEAD!!!!!!!
larryk13  
#3 Posted : Friday, March 19, 2010 1:14:56 PM(UTC)
larryk13

Rank: Member

Groups: Registered
Joined: 3/19/2010(UTC)
Posts: 4

Thank you very much denman!!! i suspected F20, but wasnt sure. thats the part i will replace....

thanks again,
larry
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.