Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
raise the washer top to the service position
Options
Go to last post Go to first unread
Model: 110.21064000 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
hundeby  
#1 Posted : Friday, March 28, 2008 11:52:03 AM(UTC)
hundeby

Rank: Member

Groups: Registered
Joined: 3/28/2008(UTC)
Posts: 2
:confused: The Whirlpool manuel states "pry emblem off from front of washer trim and remove T-20 torx screws" The Kenmore Calypso does not have an emblem on the front of the top.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
bambiblaster  
#2 Posted : Friday, March 28, 2008 2:28:25 PM(UTC)
bambiblaster

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/4/2008(UTC)
Posts: 116
There are 2 push clips about 4 inches from left and right corners inward.. push them in and raise top... remove the clips while you work on it so when you lay top down for any reason it wont snap shut again on you
Back to top
hundeby  
#3 Posted : Saturday, April 5, 2008 4:37:18 PM(UTC)
hundeby

Rank: Member

Groups: Registered
Joined: 3/28/2008(UTC)
Posts: 2
Originally Posted by: bambiblaster Go to Quoted Post
There are 2 push clips about 4 inches from left and right corners inward.. push them in and raise top... remove the clips while you work on it so when you lay top down for any reason it wont snap shut again on you


Thanks! it worked just great
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET