Some Lights are on but wont start Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KUDP01FLSS1	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

vykefan4life		#1 Posted : Tuesday, December 15, 2009 1:05:43 PM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2009(UTC) Posts: 6		there is power to the unit..when i push the "normal" button the light turns green, but when i push the "start" button nothing happens except the "normal" light blinks once...the unit is not locked.... when i push the the High Temp and Energy Save button alternately a few times all the lights turn on..I then push cancel and all the lights turn off....all other lights light individually when pushed except the Start light
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Tuesday, December 15, 2009 2:44:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check the door switch(es) and make sure it's properly engaged when the door is latched. Post the results. Here are the breakdown diagrams and Replacement parts for WHIRLPOOL KUDP01FLSS1 Dishwasher | AppliancePartsPros.com Here is the Tech sheet. Gene.
User Profile View All Posts by User View Thanks

vykefan4life		#3 Posted : Tuesday, December 15, 2009 2:54:02 PM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2009(UTC) Posts: 6		The door seems to be working...is there a way to make sure the latch is engaged when the door is closed...is there a way to check it using the touch pad
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, December 15, 2009 3:52:43 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The only way to verify it is to test it with an Ohmmeter. Gene.
User Profile View All Posts by User View Thanks

vykefan4life		#5 Posted : Tuesday, December 15, 2009 5:03:49 PM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2009(UTC) Posts: 6		i will check it..lets say it works...what could be the problem?
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Tuesday, December 15, 2009 5:25:24 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Lets do one thing at a time. Gene.
User Profile View All Posts by User View Thanks

vykefan4life		#7 Posted : Wednesday, December 16, 2009 3:29:24 PM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2009(UTC) Posts: 6		Thank you Gene. I appreciate your help. i have the ohmmeter, but dont how to test..do i have to remove a part of the panel to do it...or is there a way to do that without removing any of the screws...if i have to remove panel please talk me thru it :) I can unscrew the screws around the inside of door easy enough but how the rest come apart.
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Wednesday, December 16, 2009 4:22:23 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The door has to be taken apart. You can find the instructions in the Service manual. Gene.
User Profile View All Posts by User View Thanks

vykefan4life		#9 Posted : Thursday, December 17, 2009 7:53:07 PM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2009(UTC) Posts: 6		thanks i will let you know how that goes
User Profile View All Posts by User View Thanks

vykefan4life		#10 Posted : Wednesday, December 30, 2009 8:56:36 PM(UTC)
Rank: Member Groups: Registered Joined: 12/15/2009(UTC) Posts: 6		Gene...ran out of time and hd to call a repair guy...turns out it is the door latch...thank you so much for your help
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)