2 Pages12> Go to Page...

GE side by side Freezer/Fridge not cooling well Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GSS221FPA	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

dustin1976		#1 Posted : Sunday, September 20, 2009 9:43:18 AM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 13		Couple days ago I noticed my ice in the maker was melting down into to the bottom of the freeze. Looking further I noticed that both sides are not cooling well. I have cleaned the coil in the back so far and checked for air leaks. THer is also frost building up on the back wall, the ice tray has water but will not freeze and dump. PLease help , thanks
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

applianceman		#2 Posted : Sunday, September 20, 2009 3:46:20 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		[FONT='Times New Roman']Remove the back cover that has the ice build up and melt all the ice of the coils. More than likely the defrost heater caused the ice to build up. You can check the heater with an ohmmeter and if it is open replace it. [/FONT]Refrigerator repair guide
User Profile View All Posts by User View Thanks

dustin1976		#3 Posted : Sunday, September 20, 2009 4:22:00 PM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 13		Thanks so much! I'm on it, hope this does it.
User Profile View All Posts by User View Thanks

dustin1976		#4 Posted : Tuesday, September 22, 2009 8:56:14 AM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 13		ANy idea if my fridge is after 2002 model ?
User Profile View All Posts by User View Thanks

dustin1976		#5 Posted : Tuesday, September 22, 2009 9:04:24 AM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 13		I tested the fridge with an old tester plugged in the wall/fridge plugged in the tester. Current was there so heater is good ?
User Profile View All Posts by User View Thanks

applianceman		#6 Posted : Tuesday, September 22, 2009 7:09:44 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		Yes, yours is a 2002 or newer model. I don’t quite follow the test you are saying you did.
User Profile View All Posts by User View Thanks

applianceman		#7 Posted : Tuesday, September 22, 2009 7:14:55 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		I am assuming you just did an amp test, am I correct? If so it doesn’t prove the heater is bad or good. Unless you know the refrigerator was in defrost and the current flow was relatively high (8-10 amps or so). Even then it wouldn’t necessary prove it.
User Profile View All Posts by User View Thanks

dustin1976		#8 Posted : Friday, October 30, 2009 2:29:24 PM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 13		What would u try to replace 1st ? Defrost thermostat or one of the 2 sensor temp ? Looks like I'll save money even if I replace both. Thanks
User Profile View All Posts by User View Thanks

applianceman		#9 Posted : Friday, October 30, 2009 2:49:38 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		The defrost heater would be the first thing I would try unless you tried that already and it didn’t work or tested it with an ohmmeter. The next thing would be the senor. There are pictures on this page that will help identify faulty sensors and defrost thermostats. GE Refrigerator Repair Guide
User Profile View All Posts by User View Thanks

dustin1976		#10 Posted : Saturday, October 31, 2009 7:05:25 AM(UTC)
Rank: Member Groups: Registered Joined: 9/20/2009(UTC) Posts: 13		OK , I have searched my model # Gss22ifpaww. Models with the same model # except for the last 3 digits pop up and take a #ah1993872 defrost heater. I call GE and get a #wr51x1053 from they're people. Trying to see if thats the same part with different #'s depending on vendor. GE is more expensive to order from if so. Thanks for any help
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)

2 Pages12> Go to Page...